
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information customize cookiesTrack rail aligner sleepers, 10 units. Each piece has four sleepers with soldering PADs to ensure a fine aligment of rails between two different baseboards. It's an exclusive product of El Taller del Modelista.
Capacitor discharge unit (CDU). Suitable for double solenoid motors of all scales.
Turnout, Medium radius, right hand, electrofog. Nominal radius: 457 mm, Angle 14º, Length: 143 mm.
With the Detail Markers, you can paint on details quickly and easily.
4 pairs power feed rail joiners, nickel silver, for code 70, 75 and 83.
R3/R4 curved turnout right. Radius of main rail and branch track 419.6 mm (R3)/30°. Suitable action mechanisms: 40295, 40297; 10030.
R2/R3 curved turnout left. Radius of main rail and branch track 419.6 mm (R3)/30°. Suitable action mechanisms: 40295, 40297; 10030.
Eight power feed rail joiners, nickel silver, for code 100. Contains 4 joiners with red wire and four with black wire (20cm wire lenght each).
This third rail cleaning wagon has been developped especially for the removal of stuck oil and dirt residues, deposits from adhesive tire abrasion, oxide films from rail, mid conductor and contact wire, paint residues, etc.
Circuit track with potential-free switching contact, with bedding.
Turntable motor. Non-indexing motor designed for use with all PECO turntables.
Attractively packaged, this Starter Set makes an ideal present and contains all the necessary track components for a beginner to build their first HOe layout.
Infinitely flexible, featherlight, sound insulating, can be formed to any track radius.
ROCO LINE track set E (tracks with bedding).Content: - 1 straight tracks G1 (42510) - 2 straight track G½ (42512) - 2 manual tournouts left (42538) - 2 manual tournouts right (42539) - 1 manual uncoupler track. - 2 buffer stop kit (42608) - 1 track end piece (42651)
ROCO LINE track set D (tracks with bedding).Content: - 9 straight tracks G1 (42510) - 1 straight track G½ (42512) - 1 curved tracks R2 (42522) - 10 curved tracks R3 (42523) - 2 manual tournouts left (42538) - 1 manual curved tournout left (42558) - 1 buffer stop kit (42608) - 1 track end piece (42651) - 1 substitute...
ROCO LINE track set C (tracks with bedding).Content: - 2 straight tracks G1 (42510) - 1 straight track G½ (42512) - 1 curved track R10 (42528) - 2 curved tracks R2 (42522) - 1 manual uncoupler track (G½) - 1 manual curved turnout right BWr2/3 (42559) - 1 manual turnout right Wr15 (42539)
One slow action point motor. The motor switch is used for electric operation of the two-position mechanisms in models, such as turnout points or mechanical signals and barriers.
One slow action point motor. The motor switch is used for electric operation of the two-position mechanisms in models, such as turnout points or mechanical signals and barriers.
Track set B contains: 13 straight tracks G200 (42510), 1 turnout left hand (42538), 1 buffer (42608) and 1 roadbed end piece (42651). Space required approx. 230 x 90 cm.
Embankment end piece. These end pieces provide a neat closure of the roadbed at buffer stops, display cases, etc.
Centrepiece for double crossover DGV15 with bedding. Length 115 mm, crossing angle 30°.
Crossing K15 with bedding. Length 230 mm (standard length), crossing angle 15°.
Double slip turnout DKW15 with bedding, manually operated. Design “Baeseler” with closure blades located at the outside. Length 230 mm (standard length), crossing angle 15°, effective branch radius 1050 mm.
Single slip turnout EKW10 with bedding, manually operated. Standard design with internal switch rails.Length 345 mm (standard length), crossing angle 10°, branch radius 959 mm.
R5/R6 curved turnout right with bedding. Radius of main rail and branch track 542,8 mm (R2)/30°. Suitable action mechanisms: 42620 or 42624.
R5/R6 curved turnout left with bedding. Radius of main rail and branch track 542,8 mm (R2)/30°. Suitable action mechanisms: 42620 or 42624.
Curved turnout right hand BWl9/10 with bedding, manually operated. Radius of main track and branch track 826.4 mm (R9), arc angle 30°
Curved turnout left hand BWl9/10 with bedding, manually operated. Radius of main track and branch track 826.4 mm (R9), arc angle 30°
R2/R3 curved turnout right. Radius of main rail and branch track 358 mm (R2)/30° with bedding. Suitable action mechanisms: 42620 or 42624.
R2/R3 curved turnout left. Radius of main rail and branch track 358 mm (R2)/30° with bedding. Suitable action mechanisms: 42620 or 42624.
Double slip turnout DKW10 with bedding, manually operated. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts.
Single slip turnout EKW15 with bedding, manually operated. Standard design with internal switch rails.Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm.
Three-way turnout. Length 287.5 mm, branch radius 873.5 mm each, branch angle 15° each. Suitable electric mechanisms: 2x 42620 or 2x 42624.
Turnout right hand Wl15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization.
Curved track of 1962 mm of radius (R20) and 5 degrees with bedding.
Curved track of 888 mm of radius (R10) and 15 degrees with bedding.
Curved track of 826,4 mm of radius (R9) and 30 degrees with bedding.
Curved track of 604,4 mm of radius (R6) with bedding and 30 degrees.
Curved track of 542,8 mm of radius (R5) and 30 degrees.
Curved track of 481,2 mm of radius (R4) with bedding and 30 degrees.
Curved track of 419,6 mm of radius (R3) with bedding and 30 degrees.
Curved track of 358 mm of radius (R2) with bedding and 30 degrees.
Feeder track with bedding and EMC interference suppressor. 115 mm. Not suitable for digital operation.
The Uncoupler Gluing Jig is designed to aid in the precision installation of Uncouplers in track. For installing #312, #321 and #322 permanent magnet uncouplers.
Straight track element with bedding, length: 57,5 mm (quarter standard length).
Straight track element with bedding, length: 115 mm (half standard length).
DG1 diagonal straight element with bedding, length 119 mm.