
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More informationECoSDetector feedback module. The ECoSDetector is able to monitor up to 16 track sections and reports the presence of a loco (track occupancy). Each of the 16 inputs has a maximum current capability of 3A. Four of the inputs are RailCom.Opto-couplers are used to provide a reliable detection. Two or three rail operation is easily selected through jumpers....
21 pins decoder especially configured for the RENFE 1900 locomotive from MABAR.
21 pins decoder especially configured for the RENFE 4000 locomotive from MABAR.
18 pins decoder for RENFE locomotives series 353 and 354 from Arnold.
A 15x11 mm sugar cube speaker with adaptable soundbox. Identical to those used by ESU in their Loksound 5 decoders.
21 pins decoder especially configured for the RENFE 279 from ELECTROTREN (independent lights version)
21 pins decoder especially configured for the RENFE 253 units from MABAR.
21 pins decoder especially configured for the RENFE 596 diesel railcar from ELECTROTREN.
Sound decoder for Stadler Euro Dual from Sudexpress.
Foam train service tray. With magnetic storage recess.
21 pins decoder especially configured for Euro 4000.
21 pins decoder especially configured for the locomotive series 269 RENFE, from ELECTROTREN.
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. The LokPilot 5 Fx DCC is a "pure-bred" DCC decoder. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.
21 pins decoder especially configured for the locomotive series BB9400 SNCF, from LS Models. Note: Suitable for the last models which requires an specific light mapping (such us item 10209)
18 pins decoder especially configured for the 4700 locomotive from MfTrain.
21 pins decoder especially configured for EURODUAL.
21 pins decoder especially configured for the RENFE S-114 Avant from ELECTROTREN.
LokPilot 5 Basic, with 21 pins connector. For DCC systems, with Railcom. Up to four amplified outputs and eight logic-level outputs are available.
LokPilot 5 Basic, with 8 pins connector. For DCC systems, with Railcom. Up to four amplified outputs are available.
Function decoder LokPilot Fx micro DCC, NEM652. The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.
Function decoder LokPilot Fx micro DCC, Next18. The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. The LokPilot 5 Fx DCC is a "pure-bred" DCC decoder. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.
SwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Servo has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. As it speaks DCC with RailCom® as well as Motorola® and Selectrix® it can be operated with all common digital centers.
21 pins decoder especially configured for the RENFE 281 locomotive from ELECTROTREN.
21 pins decoder especially configured for the RENFE Ferrobus railcar from ELECTROTREN.
21 pins decoder especially configured for the locomotive series CC-6500 SNCF, from LS Models.
Loksound 5 Decoder nano, single wires. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. As it speaks DCC with RailCom® as well as Motorola® and Selectrix® it can be operated with all common digital command stations. Its flexible function key allocation and the various light effects are typical ESU V5 decoder features....