Electromagnetic universal point motor with end-off switching for FLEISCHMANN ballasted tracks H0 and N. Prepared to accept the clip-in illuminated point lantern 644020 (H0) / 944001 (N)
Extension set for the Fleischmann turntable ref. 6154, for two-rail system. Includes 3 exit tracks and 3 over-run ends.
Lever spare part for PROFI turnouts.
The modern turntable control switch is designed for use in conjunction with the various turntables in the FLEISCHMANN range as well as the Märklin turntable, article number 7286. An LCD display gives a visual indication of the setting of the
Isolating rail joiners (12 pieces).
Wood-screws for fastening down tracks, rackrails, signals, relays, controlunits, etc. Sold by the gross.
Track feed clips ( 2-pole) for PROFI tracks. Track feed clips can only be clipped onto the track at each joint where the tracks meet. To save using a feed track. The single feed is for isolating sections or signal control sections.
Crossover track, left hand crossing, 18°, length: 200 mm.
Crossover track, 36°, length: 105 mm.
Uncoupler track for manual operation. Track length 100 mm.
Ballast for PROFI tracks (100 g).
Track feed clips ( 2-pole) for PROFI tracks. Track feed clips can only be clipped onto the track at each joint where the tracks meet. To save using a feed track.
The turnout lantern is used to selectively designating a left or right of way. Lighting with maintenance-free LEDs. From the switch-independent power supply. Suitable for all with 'W' designated course of the PROFI-track system. Not valid for
Transitional rail joiner (20 units) to connect HO tracks with a 2,5 mm rail profile height with tracks having a 2,1 mm rail profile height. By simply removing the factory mounted rail joiner and exchanging it for the 6437 joiner, the turntable 6154
Extension set for the Fleischmann turntable ref. 6152, for two-rail system. Includes 3 exit tracks and 3 over-run ends.
Metal rail joiners. Can be used to join the flexible track, 6106, or Fleischmann track, work to other track systems. 20 units/pack
Rail joiner for tracks. Not suitable for flexible track ref. 6106. 20 units/pack
Curved track with ballast of 36° and radius R1 (356,5 mm). Ten pieces make up a circle.