Straight track element with bedding, length: 115 mm (half standard length).
DG1 diagonal straight element with bedding, length 119 mm.
Straight track element with bedding, length: 230 mm (standard length)
This grinding-cleaner has been developped especially for the removal of stuck oil and dirt residues, deposits from adhesive tire abrasion, oxide films from rail, mid conductor and contact wire, paint residues, etc.
Turnout left hand Wl15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization.
Useful tool to distribute the ballast quickly and easily and glue applicator. Suitable for H0 scale tracks.
Suitable for all ROCO LINE bedding switches. The digital switch drive is simply plugged into the recess on the underside of the switches. The electrical connection is made with two cables directly to the rail profiles. The digital switch drive already includes a DCC-Decoder (this new version is RailCom® compatible) and can be programmed after installation.
Advanced powered railer. Aluminium powered base to run and rail your long engines and cars on track with ease, prompt and hassle-free.
Replacement parts for the Mabar track cleaner wagon.
Cleaner wagon auxiliary service, RENFE. Corresponding with era IV.
Universal bedding switch drive. Low switching current consumption, limit switch.
This cleaning device, fed by your transformer, cleans driven and not driven wheels of your model vehicles of oil and dirt areas. Thus the device is equally suitable for locos and waggons and can be driven on by complete trains.
Left hand turnout with ballast. Length 345 mm, branch radius 1946 mm, branch angle, 8.1°.
Right hand turnout with ballast. Length 345 mm, branch radius 1946 mm, branch angle, 8.1°.
Track set C1 contains: Contents: 6x straight tracks G200, 3x straight tracks G185, 2x curved tracks R3, 1x manual curved turnout, left, 1x manual curved turnout, right. Space required: approx. 230 x 100 cm
Track set B1 contains: 2x straight tracks G200, 4x straight tracks G185, 2x curved tracks GB2, 1x manual turnout, left, 1x manual turnout, right. Space required: approx. 250 x 90 cm
Track set A1 contains: 4x straight tracks G200, 1x manual turnout, left, 1x buffer stop kit, 1 pack roadbed end pieces. Space required: approx. 210 x 90 cm
Electromagnetic universal point motor with end-off switching for FLEISCHMANN ballasted tracks H0 and N. Prepared to accept the clip-in illuminated point lantern 644020 (H0) / 944001 (N)
A great space-saver, gives a choice of three directions in a length of only 220mm enabling you to have the maximum number of tracks in the minimum of space. Nominal radius: 610mm. Angle: 12º Length: 220mm
Extension set for the Fleischmann turntable ref. 6154, for two-rail system. Includes 3 exit tracks and 3 over-run ends.
The modern turntable control switch is designed for use in conjunction with the various turntables in the FLEISCHMANN range as well as the Märklin turntable, article number 7286. An LCD display gives a visual indication of the setting of the
Uncoupling decoder for geoLine. For the retrofitting of the uncoupling tracks 61118 for digital operation. Protected housing inside the bedding body. Switch addresses can be assigned from 1 to 1024. With short circuit protection.
Extension track set for Digital Starter Set, Set 1 to build a parallel circle. Contents: 12 curved tracks R4, 4 straight tracks G200, 8 straight tracks G185, 2 turnouts left and right each equipped with electric motors and turnout decoders, 1 turnout
Curved turnout right hand. They offer the greatest realism with their smooth gradual curve. Nominal radius: 1524/762 mm. Length: 258 mm