Locomotive decoders
€33.90 In Stock
Decoder 1A, Plux16. Six functions. ZIMO MX630P16
1A decoder, Plux16 connector (16-pins). Characteristics: - Motor output of 1A, although it supports puntual peaks of 2.5A. - Six outputs for functions (plus two logical functions). - For both DCC and Motorola systems - Railcom - Dimensions of 20 x 11 x 3,5 mm.
€33.90 VAT included
€24.95 In StockDCC decoder with 6 pin connector. BACHMANN 36-556RA
E-Z Command 90º 6 Pin DCC Decoder.
€24.95 VAT included 
€35.95 In Stock21 pins decoder for RENFE 269. ESU ER301/269
21 pins decoder especially configured for the locomotive series 269 RENFE, from ELECTROTREN.
€35.95 VAT included 
€21.95 Out of stockFunction decoder LokPilot Fx V5.0, 8 pins. DCC. ESU 59220
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. The LokPilot 5 Fx DCC is a "pure-bred" DCC decoder. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.
€21.95 VAT included 
€35.95 In Stock21 pins decoder for BB9400 SNCF. ESU De9400SNCF
21 pins decoder especially configured for the locomotive series BB9400 SNCF, from LS Models. Note: Suitable for the last models which requires an specific light mapping (such us item 10209)
€35.95 VAT included 
€119.90 In StockDigital decoder w/ sound for RENFE 353. ELECTROTREN ER301S353_21
Digital decoder with sound for RENFE 353 locomotive. Made by ESU, Loksound 4.0.
€119.90 VAT included 
€35.95 In Stock18 pins decoder 4700. ESU ER301/4700
18 pins decoder especially configured for the 4700 locomotive from MfTrain.
€35.95 VAT included 
€35.95 In Stock
€35.95 In Stock21 pins decoder for EURODUAL ESU ER301/DUAL
21 pins decoder especially configured for EURODUAL.
€35.95 VAT included 
€35.95 In Stock
€35.95 In Stock21 pins decoder for RENFE S-114 Avant. ESU ER301/114
21 pins decoder especially configured for the RENFE S-114 Avant from ELECTROTREN.
€35.95 VAT included 
€24.95 In StockLokPilot 5 Basic, with 21 pins connector. ESU 59029
LokPilot 5 Basic, with 21 pins connector. For DCC systems, with Railcom. Up to four amplified outputs and eight logic-level outputs are available.
€24.95 VAT included 
€23.95 Out of stockLokPilot 5 Basic, with 8 pins connector. ESU 59020
LokPilot 5 Basic, with 8 pins connector. For DCC systems, with Railcom. Up to four amplified outputs are available.
€23.95 VAT included 
€31.95 In StockFunction decoder LokPilot Fx micro DCC, NEM652. ESU 59120
Function decoder LokPilot Fx micro DCC, NEM652. The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.
€31.95 VAT included 
€31.95 In StockFunction decoder LokPilot Fx micro DCC, Next18. ESU 59128
Function decoder LokPilot Fx micro DCC, Next18. The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.
€31.95 VAT included 
€21.95 Out of stockFunction decoder LokPilot Fx V5.0, 21 pins. DCC. ESU 59229
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. The LokPilot 5 Fx DCC is a "pure-bred" DCC decoder. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.
€21.95 VAT included 
€26.90 Out of stockDecoder, without wires, 1.0A. DOEHLER HAAS DH10C-0
Decoder, without wires, 1.0A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 4 output functions (2 x 150 mA for lights and 2 x 300 mA for auxiliary functions).
€26.90 VAT included 
€119.90 In StockDigital decoder w/ sound for RENFE 354. ELECTROTREN ER301S354_21
Digital decoder with sound for RENFE 354 locomotive. Made by ESU, Loksound 5.0.
€119.90 VAT included 
€119.90 In StockDigital decoder w/ sound for RENFE 592 "Camello". ELECTROTREN ER301S592_21
Digital decoder with sound for RENFE 592 "Camello" locomotive. With 21-pins plug. Made by ESU.
€119.90 VAT included 
€23.95 In StockFunction decoder LokPilot Fx V5.0, 21 pins. ESU 59219
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. As it speaks DCC with RailCom® as well as Motorola® and Selectrix® it can be operated with all common digital centers.
€23.95 VAT included 
€78.90 In StockSound decoder with wires, 1.5A. DOEHLER HAAS SD16A0
Sound decoder without wires, 1.5A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 6 output functions (2 x 150 mA for lights; 2 x 300 mA for auxiliary functions 1 and 2 and 1000mA for 3 and 4). Two logic auxiliary functions for 5 and 6.
€78.90 VAT included 
€35.95 In Stock21 pins decoder for RENFE 281 locomotive. ESU ER301/281
21 pins decoder especially configured for the RENFE 281 locomotive from ELECTROTREN.
€35.95 VAT included 
€35.95 In Stock
€119.90 In StockDigital decoder w/ sound for RENFE Ferrobus railcar. ELECTROTREN ER301S591
ESU digital decoder with sound for RENFE Ferrobus railcar, manufactured by Electrotren. It is 21-pin decoder with independent speaker.
€119.90 VAT included 
€35.95 Out of stock21 pins decoder for RENFE Ferrobus railcar. ESU ER301/591
21 pins decoder especially configured for the RENFE Ferrobus railcar from ELECTROTREN.
€35.95 VAT included 
€35.95 In Stock21 pins decoder for CC-6500 SNCF. ESU De6500SNCF
21 pins decoder especially configured for the locomotive series CC-6500 SNCF, from LS Models.
€35.95 VAT included 
€105.00 In StockLoksound 5 Decoder nano, single wires. ESU 58923
Loksound 5 Decoder nano, single wires. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
€105.00 VAT included 
€23.90 In StockFunction decoder LokPilot Fx V5.0, NEM652. ESU 59210
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. As it speaks DCC with RailCom® as well as Motorola® and Selectrix® it can be operated with all common digital command stations. Its flexible function key allocation and the various light effects are typical ESU V5 decoder features....
€23.90 VAT included 
€95.00 Out of stockSound decoder for RENFE Mikado (oil). DOEHLER HAAS SDMFUEL
Sound decoder with the iconic sounds of this train (oil version). Includes speaker.
€95.00 VAT included 
€95.00 Out of stockSound decoder for RENFE 276. DOEHLER HAAS D&H
D&H 8 pins sound decoder with the iconic sounds of this train. Includes speaker and sound chamber.
€95.00 VAT included
€119.90 Out of stock
€95.00 Out of stockSound decoder for RENFE 276. DOEHLER HAAS D&H
D&H 8 pins sound decoder with the iconic sounds of this train. Includes speaker and sound chamber.
€95.00 VAT included 
€35.95 Out of stock21 pins decoder for RENFE 277. ESU ER301/277
21 pins decoder especially configured for the RENFE 277 locomotive from ELECTROTREN.
€35.95 VAT included 
€35.95 In Stock21 pins decoder 21 for RENFE 316/318 ESU ER301/316_318
21 pins decoder especially configured for the RENFE 316 and 318 locomotive from ELECTROTREN.
€35.95 VAT included 
€31.95 Out of stockLokPilot Micro V5.0 DCC decoder, PluX16. ESU 59824
LokPilot Micro V5.0 DCC decoder, PluX16. Allows DC and DCC operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 6 function outputs which achieve 250 mA load each.
€31.95 VAT included 
€32.95 Out of stockLokPilot Micro V5.0 DCC decoder, 8-pin plug. ESU 59820
LokPilot Micro V5.0 DCC decoder, with 8-pin plug according to NEM 652. Allows DC and DCC operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
€32.95 VAT included 
€34.95 In StockLokPilot Micro V5.0 decoder, Next18. Multiprotocol. ESU 59818
LokPilot Micro V5.0 decoder, NEXT 18. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 6 function outputs which achieve 180 mA load each.
€34.95 VAT included
€32.95 Out of stockLokPilot V5.0 decoder, 21-pin plug. MKL. Multiprotocol. ESU 59649
Decoder LokPilot V5.0 with 21 pins, according to NEM660. MKL Version. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible.
€32.95 VAT included 
€33.95 Out of stockLokPilot V5.0 decoder, 6-pin plug. DCC ESU 59616
Decoder LokPilot V5.0 with 6 pins, according to NEM651. It allows operation in DC and DCC. RailComPlus compatible.
€33.95 VAT included 
€33.95 In StockLokPilot V5.0 decoder, 8-pin plug. Multiprotocol. ESU 59612
Decoder LokPilot V5.0 PLUX22, according to NEM658. It is a multiprotocol decoder, which allows operation in DC and DCC, as well as Motorola, Selectrix and M4. RailComPlus compatible.
€33.95 VAT included 
€119.90 In StockDigital decoder w/ sound for series 440. ELECTROTREN ER301S440_21
Digital decoder with sound for RENFE 440 units, manufactured by ESU. It is 21-pin decoder with independent speaker.
€119.90 VAT included 
€35.95 In Stock21 pins decoder for RENFE 592. ESU ER301/592
21 pins decoder especially configured for the RENFE 592 railcar from ELECTROTREN (independent lights version)
€35.95 VAT included 
€53.90 In StockSound SUSI module without wires. DOEHLER HAAS SH10A-0
Sound SUSI module without wires.
€53.90 VAT included 
€33.95 Out of stockLokPilot Micro V5.0 DCC decoder, 6-pin direct plug. ESU 59827
LokPilot Micro V5.0 DCC decoder, with 6-pin direct plug according to NEM 651. Allows DC and DCC operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
€33.95 VAT included 
€95.00 Out of stockSound decoder for RENFE 277, 21 pins. DOEHLER HAAS D&H
D&H 21 pins sound decoder with the iconic sounds of this train. Includes speaker and sound chamber.
€95.00 VAT included 
€119.90 In StockDigital decoder w/ sound for RENFE Mikado. ELECTROTREN ER302SMikado
Digital decoder with sound for RENFE Mikado steam locomotive (oil version). Made by ESU.
€119.90 VAT included 
€31.95 Out of stockLokPilot Micro V5.0 DCC decoder, PLUX22. ESU 59622
LokPilot Micro V5.0 DCC decoder, with 22-pin plug (PLUX22). Allows DC and DCC operation.
€31.95 VAT included 
€119.90 In StockDigital decoder w/ sound for series 440. ELECTROTREN ER301S470_21
Digital decoder with sound for RENFE 440 units, manufactured by ESU. It is 21-pin decoder with independent speaker.
€119.90 VAT included 
€35.95 In Stock21 pins decoder 21 for RENFE 440 RENFE. ESU ER301/440
21 pins decoder especially configured for the RENFE 440 units from ELECTROTREN (ref. 3623 and others).
€35.95 VAT included 
€89.90 In StockSound decoder with wires, 1.5A. DOEHLER HAAS SD16A3
Sound decoder with wires, 1.5A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 6 output functions (2 x 150 mA for lights; 2 x 300 mA for auxiliary functions 1 and 2 and 1000mA for 3 and 4). Two logic auxiliary functions for 5 and 6.
€89.90 VAT included 
€73.90 In StockSound decoder, without connector, 500 mA. DOEHLER HAAS SD05A-0
Sound decoder without connector, 500 mA. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 4 output functions (2 x 150 mA for lights and 2 x 300 mA for auxiliary functions).
€73.90 VAT included 
€79.90 In StockDecoder with sound, 6-pin direct plug, 500 mA. DOEHLER HAAS SD05A-1
Decoder with sound, 6-pin direct plug (NEM651), 500 mA. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 4 output functions (2 x 150 mA for lights and 2 x 300 mA for auxiliary functions).
€79.90 VAT included 
€19.00 Out of stockFunction decoder, 1.0A. Next18. DOEHLER HAAS FH18
Function decoder, 1.0A. Multisystem (SX1, SX2, DCC, DC). No motor output. 8 output functions (4 of each are logic level outputs).
€19.00 VAT included 
€36.90 Out of stockDecoder 1A, NEM652. Six functions. ZIMO MX630R
1A decoder, NEM652 connector (8-pins). Characteristics: - Motor output of 1A, although it supports puntual peaks of 2.5A. - Six outputs for functions (plus two logical functions). - For both DCC and Motorola systems - Railcom - Dimensions of 20 x 11 x 3,5 mm.
€36.90 VAT included 
€35.95 In Stock21 pins decoder for BB7200 SNCF. ESU De7200SNCF
21 pins decoder especially configured for the locomotive series BB7200 SNCF, from LS Models. Note: Suitable for the last models which requires an specific light mapping (such us item 10209)
€35.95 VAT included 
€34.95 Out of stockLokPilot V5.0 decoder, 21-pin plug. Multiprotocol. ESU 59619
Decoder LokPilot V5.0 with 21 pins, according to NEM660. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each, as weel as four locigal function outputs. It has short circuits protection.
€34.95 VAT included 
€32.95 Out of stockLokPilot V5.0 decoder, 6-pin plug. DCC ESU 59626
Decoder LokPilot V5.0 with 6 pins, according to NEM651. It allows operation in DC and DCC. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each. It has short circuits protection.
€32.95 VAT included 
€32.95 In StockLokPilot V5.0 decoder, 8-pin plug. DCC ESU 59620
Decoder LokPilot V5.0 with 8 pins, according to NEM652. It allows operation in DC and DCC. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each. It has short circuits protection.
€32.95 VAT included 
€33.95 In StockLokPilot Micro V5.0 decoder, 6-pin plug. Multiprotocol. ESU 59817
LokPilot Micro V5.0 decoder, with 6-pin plug according to NEM 651. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. The LokPilot 5 decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
€33.95 VAT included 
€34.95 Out of stockLokPilot Micro V5.0 decoder, 6-pin plug. Multiprotocol. ESU 59816
LokPilot Micro V5.0 decoder, with 6-pin plug according to NEM 651. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. The LokPilot 5 decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
€34.95 VAT included
Your hobby shop in internet. Copyright © 2021 El Taller del Modelista.