
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information
Loading...
Decoder with wires. For DCC and DC. Four output functions (2 x 150 mA and 2 x 300mA).
Decoder withut connector (to solder wires). For DCC and DC. Four output functions (2 x 150 mA and 2 x 300mA).
Decoder, 6-wires, 0.5A. For DCC and DC. 2 output functions (2 x 150 mA for lights).
Decoder, without wires, 1.0A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 4 output functions (2 x 150 mA for lights and 2 x 300 mA for auxiliary functions).
1A decoder, 9 wires. Characteristics: - Motor output of 1A, although it supports puntual peaks of 2.5A. - Six outputs for functions (plus two logical functions). - For both DCC and Motorola systems - Railcom - Dimensions of 20 x 11 x 3,5 mm.
Miniatur decoder, seven wires. Characteristics: - Motor output of 0.8A, although it supports puntual peaks of 1.5A. - Six outputs for functions. - For DCC and MM systems (multiprotocol) - Railcom - Dimensions of 13 x 9 x 2,6 mm
Small decoder, 9 wires. Characteristics: - Motor output of 0.8A, although it supports puntual peaks of 1.5A. - Six outputs for functions (4-power and 2-logical). - Suitable for servo control. - For DCC and MM systems (multiprotocol) - Railcom - Dimensions of 20 x 8,5 x 3,5 mm
Economy flat decoder, 9 wires. Characteristics: - Motor output of 0.8A, although it supports puntual peaks of 1.5A. - Four outputs for functions. - For DCC systems - Railcom - Dimensions of 25 x 11 x 2 mm.
Decoder without connector, 1.5A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 6 output functions (2 x 150 mA for lights; 2 x 300 mA for auxiliary functions 1 and 2; 2 x 1.0A for auxiliary functions 3 and 4).
Decoder with cable, 1.5A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 6 output functions (2 x 150 mA for lights; 2 x 300 mA for auxiliary functions 1 and 2; 2 x 1.0A for auxiliary functions 3 and 4).
Multi protocol locomotive decoder suitable for DC, DCC (2- + 4-digit addresses) and Märklin Motorola (previous/new) with automatic format identification. Adjustable minimum and maximum speeds as well as an open programmable drive step schedule
Decoder with cable, 0.5A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 4 output functions (2 x 150 mA for lights and 2 x 300 mA for auxiliary functions).
The Silver+ mini decoder is a less expensive variant of Gold decoders. More upmarket features (e.g. USP) have been omitted to facilitate the design of a low-cost, easy-to-install decoder. Except for USP, the Silver+ decoder has all other Gold decoder