DCC Digital Command Station with WiFi. YAMORC YD7010

DCC YD7010 Digital Command Station with WiFi.

This digital command station is the perfect backbone for any DCC-based layout. Robust and powerful, yet easy to use. It features WiFi communication, a 3-amp output and all kinds of ports to connect almost any digital accessory on the market.

IMPORTANT: This command station does not include a power supply, which can be purchased separately in 15-volt (recommended for N scale) and 18-volt (recommended for H0) versions.

Features of the YD7010 Command Station

• Unique DCC signal generator:
  • With priority control and interleaved packet generation.
  • Changes sent through any interface are immediately reflected on the track.
  • Generates RailCom Cut-Out.
• Integrated 3 A booster.
• Operating voltage range of 15–19 VDC, providing a track voltage of 13.8–17.8 V, safe for N scale and powerful for H0.
• Multiple model railroad–compatible interface buses:
  • LocoNet.
  • XpressNet.
  • Classic S88, fully compatible with ES-IN-Link using YD6902-EXT adapters.
• USB interface with three virtual COM ports:
  • YD.Command **
  • LocoNet
  • XpressNet
  It also allows updating the YD7010 firmware.
• Full network capabilities:
  • WiFi Access Point for smartphones, tablets and handheld controllers.
  • 100baseT RJ45 port to connect to your home network and PC software.
• Integrated YD9401 module providing:
  • 6 different and simultaneous protocols over WiFi and LAN:
    • XpressNet-LAN
    • Z21®
    • LocoNet Binary
    • LocoNet LBServer
    • JMRI: WiThrottle
    • YD.Command **
• Booster interface via LocoNet-B with strong 800 mA RailSync signals.
• Interface for throttles and feedback modules via LocoNet-T with 12 VDC / 800 mA supply.
• Powerful 1 A XpressNet supply.
• Roco R-BUS–compatible feedbacks via the XpressNet port.
• Roco B-BUS for compatible boosters on RJ10.
• Lenz RS-BUS–compatible feedbacks.
• Infrared sensor for IR-based controllers such as Uhlenbrock IRIS or Piko DigiFern.
• Clear LED indicators.
• Programming:
  • POM (programming on the main).
  • Service Mode (programming track).
  • ES-Link modules such as YD8044, YD8008, YD8116, YD6016ES, YD7403.
• Optional high-quality YaMoRC-spec switch-mode power supplies:
  • 15 V / 4 A
  • 18 V / 3.4 A