16-fold signal/switching decoder. YAMORC YD8116

The YaMoRC solution for switching and signaling: our 16-fold signal/switching decoder.

Features of the YD8116

• Sixteen independent 2.5Amp MOSFET outputs
• Max 5 Amp combined current
• Very simple basic setup (base address), by pressing the programming button and switching the desired turnout address
• No complicated CV settings
• Clear-text configuration based upon our new ES-Link technology
• With our YD9101-Config or YD7100-Command, configuration can be done via built-in web interface: no need for PC software or phone/tablet apps
• Or, when using the classic Windows PC interface, the YD9100 config USB stick as well as our YD6016LN can provide the configuration
• All of the 16 outputs are freely configurable, from 16× simple on/off to complex and elaborate signals with up to 8 LEDs/lamps
• Each defined device (signal, switch, turnout) can have its own address
• Devices can be operated by the new DCCext standard or conventional turnout DCC commands (throw/close)
• Numerous predefined signal definitions for Dutch, German (H/V, Ks and Form), British and Swiss prototypical signals
• Signals can include fading (bulbs emulated in case of LEDs), dark-phase inclusion, and black-out based on the previous signal’s state
• Outputs can be time-limited (e.g., for coil motors)
• Settable night-dimming for the complete decoder, with configurable address/decoder
• Very suitable for motorized point motors
• Not suitable for solenoid point motors. For these motors, use our YD8008/YD8044.
• For two-wire motorized point motors (e.g., Conrad, Hoffmann, Tillig, etc.), adapter YD6940 should be used