Function decoder LokPilot Fx micro DCC, NEM652. The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.
Function decoder LokPilot Fx micro DCC, Next18. The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. The LokPilot 5 Fx DCC is a "pure-bred" DCC decoder. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.
SwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Servo has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.
Digital decoder with sound for RENFE 354 locomotive. Made by ESU, Loksound 5.0.
Digital decoder with sound for RENFE 592 "Camello" locomotive. With 21-pins plug. Made by ESU.
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. As it speaks DCC with RailCom® as well as Motorola® and Selectrix® it can be operated with all common digital centers.
Sound decoder without wires, 1.5A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 6 output functions (2 x 150 mA for lights; 2 x 300 mA for auxiliary functions 1 and 2 and 1000mA for 3 and 4). Two logic auxiliary functions for 5 and 6.
21 pins decoder especially configured for the RENFE 281 locomotive from ELECTROTREN.
ESU digital decoder with sound for RENFE Ferrobus railcar, manufactured by Electrotren. It is 21-pin decoder with independent speaker.
21 pins decoder especially configured for the RENFE Ferrobus railcar from ELECTROTREN.
The DR5099 DigiNetHub is a double repeater where you can connect either four additional LocoNet devices and 4 X-Bus devices to your existing LocoNet and X-Bus devices. The 5 LocoNet and X-Bus connectors are completely separated from each other.
21 pins decoder especially configured for the locomotive series CC-6500 SNCF, from LS Models.
Loksound 5 Decoder nano, single wires. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. As it speaks DCC with RailCom® as well as Motorola® and Selectrix® it can be operated with all common digital command stations. Its flexible function key allocation and the various light effects are typical ESU V5 decoder features....
Sound decoder with the iconic sounds of this train (oil version). Includes speaker.
D&H 8 pins sound decoder with the iconic sounds of this train. Includes speaker and sound chamber.
D&H 8 pins sound decoder with the iconic sounds of this train. Includes speaker and sound chamber.
21 pins decoder especially configured for the RENFE 277 locomotive from ELECTROTREN.
21 pins decoder especially configured for the RENFE 316 and 318 locomotive from ELECTROTREN.
LokPilot Micro V5.0 DCC decoder, PluX16. Allows DC and DCC operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 6 function outputs which achieve 250 mA load each.
LokPilot Micro V5.0 DCC decoder, with 8-pin plug according to NEM 652. Allows DC and DCC operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
LokPilot Micro V5.0 decoder, NEXT 18. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 6 function outputs which achieve 180 mA load each.
Decoder LokPilot V5.0 with 21 pins, according to NEM660. MKL Version. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible.
Decoder LokPilot V5.0 with 6 pins, according to NEM651. It allows operation in DC and DCC. RailComPlus compatible.
Decoder LokPilot V5.0 PLUX22, according to NEM658. It is a multiprotocol decoder, which allows operation in DC and DCC, as well as Motorola, Selectrix and M4. RailComPlus compatible.
SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.
21 pins decoder especially configured for the RENFE 592 railcar from ELECTROTREN (independent lights version)
Energy storage system for locomotives. Suitable for all Doehler Hass decoders with SUSI interfaz.