Lubricant for locomotives (50 ml). MFTrain N90003

Lubricant for locomotives

High-performance penetrating lubricant specially designed to improve the operation of our locomotives, suitable for any scale. Leaves a dry lubrication film that does not drip, stain, or attract dirt or dust, and reduces friction and wear. Excellent penetration power to reach the most inaccessible areas. Long-lasting dry lubricant, penetrates and creates a protective film for gears. Repels moisture, dust, sand, and dirt. Removes and prevents rust.
Cleans, lubricates, and protects. Loosens parts stuck due to rust and prevents the formation of rust and other types of corrosion. Withstands high pressures, does not attract dirt or dust.

Oil properties

- Excellent penetration power
- Does not attract dirt, sand, dust, gravel, etc.
- Lasts 3 to 4 times longer than conventional lubricants
- Dissolves surface rust and protects against corrosion
- Loosens stuck gears or worm screws
- Repels moisture
- Small and practical packaging for easy handling
- Clean and dry lubricant, non-dripping

Applications of the locomotive lubricant

When gears are subject to continuous use, they must be coated to prevent damage and breakage. This new lubricant provides extra protection where conventional lubricants fail. Excellent choice for lubricating gear cascades, worm gears, axles, etc.

Instructions for use

Shake or stir before use. Parts must first be cleaned with a cleaning liquid. Apply dry lubricant to parts and allow it to penetrate. Wipe off excess lubricant with a clean cloth.

Note: Do not use too much lubricant. Applying a thin layer, with occasional reapplication, provides better results than a thick layer.
Do not mix with other lubricants or grease.