Sleeper and piece to match flex track with concrete sleepers (42401)12 units / pack
F4 flex track with concrete sleepers. Flex tracks can be bent to form any curve up to a radius: R2= 358 mm. In view of the fact that the rail profiles shift out of line with each other, it is necessary to cut them to length. For laying the flex
Double crossing. Length 345 mm Internal switch rails, branch radius 959 mm, frog angle 10°. For installation crossing from left or right two spacers,D2 and D8, have been included. In each case 2 matching mechanismsare required: 40295, 40297 or
Curved track of 419,6 mm of radius (R3) and 7,5 degrees.
Curved track of 358 mm of radius (R2) and 7,5 degrees.
Curved track of 1962 mm of radius (R20) and 5 degrees.
Sleeper end piece to match flex track with wooden sleepers (42400). 12 units/pack
DG1 diagonal straight element, length 119 mm.
R9/R10 curved turnout left. Radius of main rail and branch track 826,4 mm /30°. Suitable action mechanisms: 40296, 40298; 10030.
R9/R10 curved turnout right. Radius of main rail and branch track 826,4 mm /30°. Suitable action mechanisms: 40296, 40298; 10030.
G1/2 feeder track. With EMC intereference suppression unit for analog operation.
Three-way turnout. Length 287.5 mm, branch radius 873.5 mm each, branch angle 15° each. Suitable electric mechanisms: 2x 40296 or 2x 10030.