Straight track element, length: 57,5 mm (quarter standard length)
Straight track element, length: 115 mm (half standard length).
Straight track element, length: 230 mm (standard length)
Straight track element, length: 920 mm (4x standard length).
One piece of flextrack with wooden ties of 920 mm. Flex tracks can be bent to form any curve up to a radius: R2= 358 mm. In view of the fact that the rail profiles shift out of line with each other, it is necessary to cut them to length. For laying
Electric turnout mechanism right for turnouts without roadbed
Electric turnout mechanism left for turnouts without roadbed
H0 general purpose beneath board uncoupler. Suitable for later mounting for all two-rail DC track systems. Size of the propulsion unit:(LxWxH) approx. 80x40x15 mm.
The turnout decoder can switch up to eight turnouts. If light signals are used, one needs one double-spool relay (Item no.: 10019) per signal. All outputs are short-circuit proof. Overall, the decoder can be loaded with up to 2A; this also applies to
Turnout under baseboard mechanism, esoecially designed for ROCO LINE among other things: low energy consumption, shut off mechanism, 4 single-pole double-throw switch. Can also be installed horizontally.
Electric turntable for locomotives. With electric below-baseboard propulsion mechanism and control unit, as well as four terminal tracks for two-rail DC system (ref. 42616). Also suitable for centre-rail AC system (ref. 42617), not included.
Track nails, long. For fastening tracks with roadbed, approx. 500 pc/package.
Flexible track with ballast of 800 mm.
Three-way turnout, 22.5°. Length 200mm.
straight track elements G185 (185 mm length). Especially suitable for compensating 22.5° turnouts.
R2 curve with ballast. Radius 358 mm and 30º.
R3 curve with ballast. Radius 434,5 mm and 30º..
R4 curve with ballast. Radius 511,1 mm and 30º.