Mechanisms
- 1
- 2
€2.90 In StockPressure shaft butt set: 2/3/4 mm (23 pcs). TAMIYA 50380
Pressure shaft butt, opened. Used to abut, maintaining mechanical components together, etc. Requires a slot in the shaft where is inserted under pressure. The set includes 23 pieces of different sizes (2, 3 and 4 mm).
€2.90 VAT included
€4.95 Out of stock
€3.80 In StockSmall Electric Motor DC (1.5-3V). STEVENS SVM260
Small electric motor (DC). From 1.5 to 3V. Round can.
€3.80 VAT included 
€3.30 In StockSmall Electric Motor DC (1.5-3V). STEVENS SVM130
Small electric motor (DC). From 1.5 to 3V. With flat sides.
€3.30 VAT included 
€2.00 In StockMotor de corriente contínua 1,5 - 4,5V. CEBEK 6040
Motor de corriente contínua de 3 voltios y 1,2 amperios. Rango de trabajo de 1,5 a 4,5 V. Revoluciones máximas de 12380 rpm. Sentido de giro antihorario. Ideal para juguetes, maquetas, modelos a escala, etc.
€2.00 VAT included 
€12.95 In StockMicromotor de corriente contínua 0,3 - 1,3V. CEBEK 6058
Este motor súper miniatura es extremadamente sensible, arranca con sólo 0,3V y 15mA. Los cables de conexión salen directamente del motor. Perfecto para juguetes solares y otras aplicaciones que requieran un funcionamiento a muy
€12.95 VAT included 
€3.20 In StockMotor de corriente contínua 1,5 - 6V. CEBEK 6042
Motor de corriente contínua de 3 voltios de tensión nominal y 0,76 amperios. Rango de trabajo de 1,5 a 6,0 V. Revoluciones máximas de 7930 rpm. Sentido de giro variable según la polaridad. Perfecto para trabajos de
€3.20 VAT included 
€33.95 In StockMotor, Ø 7 mm. Module 0.3. FALLER 163303
Motor, Ø 7 mm, module 0.3. Is one of the motors used in the Faller Car System vehicles.
€33.95 VAT included 
€4.00 In Stock1/8 axle bush (x12). MARKITS MRAXFB32
1/8" axle bush, 3.7mm o/d x 2.2mm L (12 units). Made of brass.
€4.00 VAT included 
€5.00 Out of stock25 tooth R/H gearwheel, 6.7 mm. MARKITS MGR-4-100-252R
25 tooth R/H 2.0mm bore gearwheel [D x 6.7mm]. With boss.
€5.00 VAT included 
€4.50 Out of stockShouldered pinpoint bearings (x50). MARKITS MPPBs
Shouldered pinpoint bearings (50 units). Made of brass.
€4.50 VAT included 
€4.50 In StockPlain pinpoint bearings (x50). MARKITS MPPB
Plain pinpoint bearings (50 units). Made of brass.
€4.50 VAT included 
€4.50 In StockWaisted pinpoint bearings (x50). MARKITS MPPBw
Waisted pinpoint bearings (50 units). Made of brass.
€4.50 VAT included 
€3.40 Out of stock2mm gearbox bush (x12). MARKITS MRAXFB227
2 mm gearbox bush, 1mm L x 2.72mm D x 3.2mm FL Dia, (12 units).
€3.40 VAT included 
€5.80 Out of stockAlignment & hornblock jig, 1/8'' bearings (x3). MARKITS M4RALJ-1ss
Steel alignment and hornblock jig to suit 1/8'' bearings (3 units).
€5.80 VAT included 
€5.80 In StockAlignment & hornblock jig, 3mm bearings (x3). MARKITS M4RALJ-3ss
Steel alignment and hornblock jig to suit 3mm bearings (3 units).
€5.80 VAT included 
€33.95 In StockSynchronous hobby motor. VOLLMER 44200
For connection on AC-transformers. The motor works at a speed of 15 rounds per minute. Easy mounting and robust design. To motorise serveral Vollmer kits this motor is recommended.
€33.95 VAT included 
€8.90 Out of stockMotor de corriente contínua 12V, 5W. CEBEK 6043
Motor de corriente contínua de 12 voltios y 5 W. Este motor proporciona un alto par en relación a su tamaño.
€8.90 VAT included 
€22.95 Out of stockSynchronous hobby motor. FALLER 180629
12–16 V, AC, 60 mA. Choice of 15 or 4 rpm. Reversible for clockwise- and counter-clockwise rotation. This robust, long-lasting motor can be used for various purposes, e.g. wave swinger, conveyor, gantry crane, railway gate, wind-, water or saw
€22.95 VAT included 
€0.75 In Stock30 teeth gear. Diameter 19,2 mm. RBModel 110-30
A 30-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.75 VAT included 
€0.75 In Stock29 teeth gear. Diameter 18,6 mm. RBModel 110-29
A 29-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.75 VAT included 
€0.70 In Stock28 teeth gear. Diameter 18,0 mm. RBModel 110-28
A 28-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.70 VAT included 
€0.70 In Stock27 teeth gear. Diameter 17,4 mm. RBModel 110-27
A 27-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.70 VAT included 
€0.65 In Stock25 teeth gear. Diameter 16,2 mm. RBModel 110-25
A 25-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.65 VAT included 
€0.65 In Stock26 teeth gear. Diameter 16,8 mm. RBModel 110-26
A 26-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.65 VAT included 
€0.60 In Stock24 teeth gear. Diameter 15,6 mm. RBModel 110-24
A 24-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.60 VAT included 
€0.60 In Stock23 teeth gear. Diameter 15,0 mm. RBModel 110-23
A 23-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.60 VAT included 
€0.55 In Stock22 teeth gear. Diameter 14,4 mm. RBModel 110-22
A 22-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.55 VAT included 
€0.55 In Stock21 teeth gear. Diameter 13,8 mm. RBModel 110-21
A 21-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.55 VAT included 
€0.50 In Stock20 teeth gear. Diameter 13,2 mm. RBModel 110-20
A 20-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.50 VAT included 
€0.50 In Stock19 teeth gear. Diameter 12,6 mm. RBModel 110-19
A 19-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.50 VAT included 
€0.45 In Stock18 teeth gear. Diameter 12,0 mm. RBModel 110-18
A 18-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.45 VAT included 
€0.45 In Stock17 teeth gear. Diameter 11,4 mm. RBModel 110-17
A 17-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.45 VAT included 
€0.40 In Stock16 teeth gear. Diameter 10,8 mm. RBModel 110-16
A 16-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.40 VAT included 
€0.40 In Stock15 teeth gear. Diameter 10,2 mm. RBModel 110-15
A 15-teeth gear. Module 0,6. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.40 VAT included 
€0.50 In StockPressure shaft butt (x10). 5,9 mm. RBModel 092-23
Pressure shaft butt , opened. Used to abut, maintaining mechanical components together, etc. Requires a slot in the shaft where is inserted under pressure. Ten units.
€0.50 VAT included 
€0.50 In StockPressure shaft butt (x10). 4,4 mm. RBModel 092-19
Pressure shaft butt , opened. Used to abut, maintaining mechanical components together, etc. Requires a slot in the shaft where is inserted under pressure. Ten units.
€0.50 VAT included 
€0.50 In StockPressure shaft butt (x10). 3,9 mm. RBModel 092-15
Pressure shaft butt , opened. Used to abut, maintaining mechanical components together, etc. Requires a slot in the shaft where is inserted under pressure. Ten units.
€0.50 VAT included 
€0.50 In StockPressure shaft butt (x10). 2,9 mm. RBModel 092-12
Pressure shaft butt , opened. Used to abut, maintaining mechanical components together, etc. Requires a slot in the shaft where is inserted under pressure. Ten units.
€0.50 VAT included 
€1.10 In Stock
€0.80 In Stock
€0.80 In Stock34 teeth gear. Diameter 14,4 mm. RBModel 058-34
A 34-teeth gear. Module 0,4. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.80 VAT included 
€0.75 In Stock32 teeth gear. Diameter 13,6 mm. RBModel 058-32
A 32-teeth gear. Module 0,4. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.75 VAT included 
€0.80 In Stock28 teeth gear. Diameter 12,0 mm. RBModel 058-28
A 28-teeth gear. Module 0,4. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.80 VAT included 
€0.70 In Stock24 teeth gear. Diameter 18,2 mm. RBModel 034-24
A 24-teeth gear. Module 0,7. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.70 VAT included 
€0.60 In Stock21 teeth gear. Diameter 16,1 mm. RBModel 034-21
A 21-teeth gear. Module 0,7. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.60 VAT included 
€0.55 In Stock19 teeth gear. Diameter 14,7 mm. RBModel 034-19
A 19-teeth gear. Module 0,7. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.55 VAT included 
€0.50 In Stock18 teeth gear. Diameter 14,0 mm. RBModel 034-18
A 18-teeth gear. Module 0,7. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.50 VAT included 
€0.50 In Stock17 teeth gear. Diameter 13,3 mm. RBModel 034-17
A 17-teeth gear. Module 0,7. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.50 VAT included 
€0.45 In Stock15 teeth gear. Diameter 11,9 mm. RBModel 034-15
A 15-teeth gear. Module 0,7. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.45 VAT included 
€2.50 In StockShaft collars, 4 mm (x10). RBModel 031-40
Shaft collar made of aluminum, with screw. Shaft collars act as mechanical stops, clamp type, used as bearing surfaces and as a means for positioning components in a wide variety of equipment, including engines and gears. 10 units.
€2.50 VAT included 
€2.50 In StockShaft collars, 5 mm (x10). RBModel 031-50
Shaft collar made of aluminum, with screw. Shaft collars act as mechanical stops, clamp type, used as bearing surfaces and as a means for positioning components in a wide variety of equipment, including engines and gears.
€2.50 VAT included 
€3.00 In StockShaft collars, 2 mm (x10). RBModel 031-20
Shaft collar made of aluminum, with screw. Shaft collars act as mechanical stops, clamp type, used as bearing surfaces and as a means for positioning components in a wide variety of equipment, including engines and gears. 10 units.
€3.00 VAT included 
€2.20 In StockFluted gear shell. 8,8 x 4 mm (x10). RBModel 013-04
A fluted gear shell. Made of brass. Suitable for performing reduction gears, decrease the axle hole size, avoid frictions...
€2.20 VAT included 
€2.00 In StockFluted gear shell. 6,6 x 2 mm (x10). RBModel 013-23
A fluted gear shell. Made of brass. Suitable for performing reduction gears, decrease the axle hole size, avoid frictions...
€2.00 VAT included 
€0.65 In Stock34 teeth gear. Diameter 18,0 mm. RBModel 012-34
A 34-teeth gear. Module 0,5. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.65 VAT included 
€0.65 In Stock33 teeth gear. Diameter 17,5 mm. RBModel 012-33
A 33-teeth gear. Module 0,5. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.65 VAT included 
€0.65 In Stock32 teeth gear. Diameter 17,0 mm. RBModel 012-32
A 32-teeth gear. Module 0,5. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.65 VAT included 
€0.65 In Stock30 teeth gear. Diameter 16,0 mm. RBModel 012-30
A 30-teeth gear. Module 0,5. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.65 VAT included 
€0.65 Out of stock28 teeth gear. Diameter 15,0 mm. RBModel 012-28
A 28-teeth gear. Module 0,5. Made of Ertacetal (special plastic for gears). Perfect for performing mobile mechanisms, engines, etc.
€0.65 VAT included
- 1
- 2
Your hobby shop in internet. Copyright © 2021 El Taller del Modelista.