The #143 coupler is a standard head Whisker metal, short (1/4") centerset shank. Four units.
The #146 coupler is a standard head Whisker metal, long (25/64") overset shank . Four units.
The Uncoupler Gluing Jig is designed to aid in the precision installation of Uncouplers in track. For installing #312, #321 and #322 permanent magnet uncouplers.
The #5coupler is a universal metal coupler, medium (9/32"), with insulated draft gear box. Four units.
Highly detailed logging equipment with die-cast center beam, metal trucks, ribbed back wheels, log bunks and falling stakes. Comes with three unpainted plastic logs and couplers. Semi-kit.
Highly detailed logging equipment with die-cast center beam, metal trucks, ribbed back wheels, log bunks and falling stakes. Comes with three unpainted plastic logs and couplers. Semi-kit.
For HO and HOn3 couplers. Adjust trip pins to the correct height by gently squeezing with these specially designed pliers. Curved jaw surfaces prevent kinking of the trip pins when bending or straightening.
Highly detailed logging equipment with die-cast center beam, metal trucks, ribbed back wheels, log bunks and falling stakes. Comes with three unpainted plastic logs and couplers.
The #142 coupler is a standard head Whisker metal, medium (9/32") overset shank . Four units.
The #148 coupler is a standard head Whisker metal, medium centerset shank coupler. It will work anywhere a NO.5 coupler will work. Four units.
Two permanent magnet "between-the-rails" delayed uncouplers, for code 83 tracks. Ready to mount on top of ties for code 83 tracks, for smaller codes it is needed to cut out the ties.
Two permanent magnet "between-the-rails" delayed uncouplers, for code 100 tracks. Ready to mount on top of ties for code 100 tracks, for smaller codes it is needed to cut out the ties.
Centering spring for Kadee NEM 362 European style #17, 18, 19 and 20 couplers. 20 units per package.
This 3/4 size coupler has an extended Trip Pin mounted on a narrow gauge coupler to use with light duty old time equipment. Four units.
The #148 coupler is a standard head Whisker metal, medium centerset shank coupler. It will work anywhere a NO.5 coupler will work. Four units.
Insulated multi-purpose coupler height gauge. Includes the 148 "Whisker" coupler and #158 "Scale Whisker" coupler. A must have tool for gauging mounting height, correct coupler height, trip pin, and permanent uncoupler heights for
Electric Under-The-Track uncoupler kit. Momentary switches must be used. Kadee recommends a 16-18V and 3 Amps. power suply.
Delayed "under-the-track" uncoupler. A permanent magnet and steel intensifier plate are included along with instructions. Suitable for a variety of scales from HO to O-Scale. Track not included.
NEM-362 extra long coupler (11,68 mm). Four units.