
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information
Loading...
4 pairs power feed rail joiners, nickel silver, for code 70, 75 and 83.
Eight power feed rail joiners, nickel silver, for code 100. Contains 4 joiners with red wire and four with black wire (20cm wire lenght each).
Turntable motor. Non-indexing motor designed for use with all PECO turntables.
00/H0 planbook. Exciting layout ideas for sectional track. 36 model railway plans. Making a start. A home for your railway. Minimum space, small plans. Medium, large plans. All fully illustraded and with complete parts lists. English.
Curved Double radius R/H Inlay. Suitable for use with both code 100 and code 75 track. 2 units.
Ballast inlays for long crossing. Suitable for use with both code 100 and code 75 track. 2 units.
Ballast inlays for double slip. Suitable for use with both code 100 and code 75 track. 2 units.
Ballast inlays for 3 way medium radius inlay. Suitable for use with both code 100 and code 75 track. 2 units.
Ballast inlays for right hand medium radius turnouts. Suitable for use with both code 100 and code 75 track. 2 units.
Adaptor Base, fitted with over-centre spring for other turnouts. If above baseboard fitting is essential the Peco Turnout Motor can be mounted using this Adaptor Base. Assembled and ready to install.
Here we have the perfect solution for controlling your turnouts electrically, and in a way that will please modellers of all abilities. This carefully designed system provides all the electrical connections required for the PL-26 Passing
Adaptor Base, fitted with over-centre spring for other turnouts. If above baseboard fitting is essential the Peco Turnout Motor can be mounted using this Adaptor Base. Extension Arm included.
Mounting Plates for use with PL-10. Base unit for use with the motor with the extended pin ref. PL-10E. Full instructions and screws included.
Side Mounted Turnout Motor. Designed to clip into the side of a Setrack or Streamline OO/HO code 100 turnout. This motor alleviates the need for making holes below the baseboard. The non-intrusive design of the sealed unit sits neatly alongside the
For fixing track and turnouts. Blackened mild steel pins, 14mm long.
Provides the short burst of current needed to operate the PL-10 Turnout Motor. May be ganged using the Joining Bar PL-24.
Turnout motor (switch machine. This is the most famous type of Turnout Motor since it has been in production for well over thirty years and many thousands of enthusiasts have been using it successfully over this period of time.
Turnout Motor (Extended Pin). Designed for use with PL-9 mounting plate. Use this if you do not wish to cut a large hole in your baseboard. Drill a hole, 9.5mm through the baseboard beneath the centre of the tie bar.
Twin micro switch kit, for fitting to turnout motor PL-10. Easy to assemble unit with two microswitches to control the polarity of live frogs whilst simultaneously operating panel indicator lights. Complete with illustrated instructions. Rated 2.5
Accessory Switch, for fitting to turnout motor PL-10. Simple, inexpensive switch easily fitted underneath the Turnout Motor (PL-10) to provide electrical switching for frog polarity, signals etc. Suitable only for OO/HO and larger scales. Rated 1.5
Rail Joiners, nickel silver, for code 100. For connecting rail ends together. Provides both mechanical and electrical bonding. Nickel silver or brass.