To trigger the 42605 sleeper. Very small construction, therefore can easily be mounted beneath any vehicle. 6 units / pack
3 units of track connections (for AC, 3-line tracks), suitable for turntable ROCO 42615.
Manual turnout mechanism left for turnouts without roadbed.
Manual turnout mechanism right for turnouts without roadbed.
Reed switch in wooden sleeper, to be actuated by means of a magnet (recommended ROCO 42256). This potential-free switching contact can be installed at any point of atrack layout. The size and colour of the sleeper goes with the ROCO LINEtrack, thus
Connecting cable, no interference suppression.
Wheel retrackerset. Suitable for ROCO tracks with and without ballast (Rocoline and Geoline). Construction kit (without track).
Illuminated turnout lantern, to match general purpose below baseboard propulsion mechanism 10030 (optionally DB or SBB) and coupled 90° rotation.
Adapter rail clips for 2.5 mm rail on the Roco track (2.1 mm).
4 units of track connections (for DC two-line tracks), suitable for turntable ROCO 42615.
Spring steel rail joiner for ROCO LINE and geo-Line 2.1 mm tracks. 24 units/pack
Electric turnout mechanism left for turnouts without roadbed
H0 general purpose beneath board uncoupler. Suitable for later mounting for all two-rail DC track systems. Size of the propulsion unit:(LxWxH) approx. 80x40x15 mm.
Turnout under baseboard mechanism, esoecially designed for ROCO LINE among other things: low energy consumption, shut off mechanism, 4 single-pole double-throw switch. Can also be installed horizontally.
Electric turntable for locomotives. With electric below-baseboard propulsion mechanism and control unit, as well as four terminal tracks for two-rail DC system (ref. 42616). Also suitable for centre-rail AC system (ref. 42617), not included.
Track nails, long. For fastening tracks with roadbed, approx. 500 pc/package.
Track nails, short. For fastening tracks without roadbed, approx. 400 pc/package.