8-pins

locomotive-decoders

digital-decoders

railway-modelling

home

root

€34.60 Out of stock
Decoder NEM652 (8 pins), 1A. DOEHLER HAAS PD12A-2
Decoder with NEM652 (8 pins) connector. For DCC and DC. Four output functions (2 x 150 mA and 2 x 300mA).

€34.60 IVA INCL
Let me know when it's available
€25.80 In Stock
LokPilot 5 Basic, with 8 pins connector. ESU 59020
LokPilot 5 Basic, with 8 pins connector. For DCC systems, with Railcom. Up to four amplified outputs are available.

€25.80 IVA INCL
Buy
€34.90 Out of stock
LokPilot Micro V5.0 DCC decoder, 8-pin plug. ESU 59820
LokPilot Micro V5.0 DCC decoder, with 8-pin plug according to NEM 652. Allows DC and DCC operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.

€34.90 IVA INCL
Let me know when it's available
€40.95 In Stock
Decoder 1A, NEM652. Six functions. ZIMO MX630R
1A decoder, NEM652 connector (8-pins). Characteristics: - Motor output of 1A, although it supports puntual peaks of 2.5A. - Six outputs for functions (plus two logical functions). - For both DCC and Motorola systems - Railcom - Dimensions of 20 x 11 x 3,5 mm.

€40.95 IVA INCL
Buy
€35.50 In Stock
LokPilot V5.0 decoder, 8-pin plug. DCC ESU 59620
Decoder LokPilot V5.0 with 8 pins, according to NEM652. It allows operation in DC and DCC. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each. It has short circuits protection.

€35.50 IVA INCL
Buy
€35.90 In Stock
LokPilot Micro V5.0 decoder, 8-pin plug. Multiprotocol. ESU 59810
LokPilot Micro V5.0 decoder, with 8-pin plug according to NEM 652. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.

€35.90 IVA INCL
Buy
€37.95 In Stock
LokPilot V5.0 decoder, 8-pin plug. Multiprotocol. ESU 59610
Decoder LokPilot V5.0 with 8 pins, according to NEM652. It is a multiprotocol decoder, which allows operation in DC and DCC, as well as Motorola, Selectrix and M4. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each. It has short circuits protection.

€37.95 IVA INCL
Buy
€30.95 In Stock
Small decoder, 8-pins. ZIMO MX623R
Small decoder, 8-pins plug on wires (NEM652). Characteristics: - Motor output of 0.8A, although it supports puntual peaks of 1.5A. - Six outputs for functions (4-power and 2-logical). - Suitable for servo control. - For DCC and MM systems (multiprotocol) - Railcom - Dimensions of 20 x 8,5 x 3,5 mm

€30.95 IVA INCL
Buy
€30.50 In Stock
Economy flat decoder, NEM652. ZIMO MX600R
Economy flat decoder. NEM652 connector (8-pins). Characteristics: - Motor output of 0.8A, although it supports puntual peaks of 1.5A. - Four outputs for functions. - For DCC systems - Railcom - Dimensions of 25 x 11 x 2 mm.

€30.50 IVA INCL
Buy
€49.50 In Stock
Decoder, 8-pin plug, 1.5A. DOEHLER HAAS DH16A-2
Decoder, 8-pin plug, 1.5A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 6 output functions (2 x 150 mA for lights; 2 x 300 mA for auxiliary functions 1 and 2; 2 x 1.0A for auxiliary functions 3 and 4).

€49.50 IVA INCL
Buy
€32.95 In Stock
DCC decoder with 8 pin connector. BACHMANN 36-555
E-Z Command 1.0 Amp 4 Function 8 Pin DCC Decoder.

€32.95 IVA INCL
Buy
€39.95 In Stock
Silver Direct + Decoder. LENZ 10330
The SILVER direkt + was designed especially for locomotives equipped with an 8 pin NEM652 interface. The decoder pins are located directly on the circuit board so that the decoder can be simply plugged onto the interface. It doesn’t get any

€39.95 IVA INCL
Buy
€26.50 Out of stock
Locomotive decoder STANDARD+. LENZ 10231-02
Locomotive decoder STANDARD+, equipped with all features considered standard for a DCC locomotive decoder, and also supports the RailCom function.

€26.50 IVA INCL
Let me know when it's available