Returns in 30 days
Satisfied or refunded
2 years warranty
Be the first to ask a question about this product!
Airbrush thinner. Thiner for Model Air and Liquid Acrylic. Thiner used to extend the colors, to increase fluidiy and delay the drying time. We recommend the addition of a few drops of thinner to the colors while airbrushing.
F4 flex track with concrete sleepers. Flex tracks can be bent to form any curve up to a radius: R2= 358 mm. In view of the fact that the rail profiles shift out of line with each other, it is necessary to cut them to length. For laying the flex
Standard crossing. Length 230 mm, standard design with internal switch rails, without motor; branch radius 531 mm, crossing angle 15°. Suitable action mechanisms, 2 each x 40295/40297 or 10030. For diagonal installation two D4 and one D12 are
Double crossing. Length 230 mm, crossing angle 15°, effective branch radius 1050mm. Owing to the geometrical characteristics of this type of double slipswitch it is necessary to always use it polarized. Suitable action mechanism, 40295 (or
Standard crossing. Length 345 mm, branch radius 959 mm, branch angle 10°. For installation crossing from left or right two D2 diagonal 2.5 spacers are included. An 8-mm spacer element is included for combining with diagonally installed 10°
Degree crossing (without turnout). Length 230 mm, crossing angle 15°; by using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking. The railroad lines that cross each
Degree crossing (without turnout). Length of tracks 119 mm, crossing angle 30°. The railroad lines that cross one another are not electrically isolated. Among other things they are suitable for forming double track connections with the 15°