Loading...
Left hand turnout. Length 230 mm, branch radius 873.5 mm, branch angle 10,8°. An 8-mm spacer element is included for diagonal installation. Suitable action mechanisms ref. 40295, 40297 or 10030.
Track rail aligner sleepers, 10 units. Each piece has four sleepers with soldering PADs to ensure a fine aligment of rails between two different baseboards. It's an exclusive product of El Taller del Modelista.
R3/R4 curved turnout right. Radius of main rail and branch track 419.6 mm (R3)/30°. Suitable action mechanisms: 40295, 40297; 10030.
R2/R3 curved turnout left. Radius of main rail and branch track 419.6 mm (R3)/30°. Suitable action mechanisms: 40295, 40297; 10030.
Sleeper and piece to match flex track with concrete sleepers (42401)12 units / pack
F4 flex track with concrete sleepers. Flex tracks can be bent to form any curve up to a radius: R2= 358 mm. In view of the fact that the rail profiles shift out of line with each other, it is necessary to cut them to length. For laying the flex
Double crossing. Length 345 mm Internal switch rails, branch radius 959 mm, frog angle 10°. For installation crossing from left or right two spacers,D2 and D8, have been included. In each case 2 matching mechanismsare required: 40295, 40297 or
Curved track of 419,6 mm of radius (R3) and 7,5 degrees.
Curved track of 358 mm of radius (R2) and 7,5 degrees.
Curved track of 1962 mm of radius (R20) and 5 degrees.
Sleeper end piece to match flex track with wooden sleepers (42400). 12 units/pack
R9/R10 curved turnout left. Radius of main rail and branch track 826,4 mm /30°. Suitable action mechanisms: 40296, 40298; 10030.
R9/R10 curved turnout right. Radius of main rail and branch track 826,4 mm /30°. Suitable action mechanisms: 40296, 40298; 10030.
G1/2 feeder track. With EMC intereference suppression unit for analog operation.
Three-way turnout. Length 287.5 mm, branch radius 873.5 mm each, branch angle 15° each. Suitable electric mechanisms: 2x 40296 or 2x 10030.
Curved track of 888 mm of radius (R10) and 15 degrees.
Curved track of 826,4 mm of radius (R9) and 30 degrees.
Degree crossing (without turnout). Length of tracks 119 mm, crossing angle 30°. The railroad lines that cross one another are not electrically isolated. Among other things they are suitable for forming double track connections with the 15°
Degree crossing (without turnout). Length 230 mm, crossing angle 15°; by using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking. The railroad lines that cross each
Standard crossing. Length 345 mm, branch radius 959 mm, branch angle 10°. For installation crossing from left or right two D2 diagonal 2.5 spacers are included. An 8-mm spacer element is included for combining with diagonally installed 10°
Right hand turnout. Length 345 mm, branch radius 1946 mm, branch angle 10°. An 5-mm spacer element is included for diagonal installation. Suitable action mechanisms ref. 40296, 40298 or 10030.
Left hand turnout. Length 345 mm, branch radius 1946 mm, branch angle 10°. An 5-mm spacer element is included for diagonal installation. Suitable action mechanisms ref. 40295, 40297 or 10030.
R5/R6 curved turnout right. Radius of main rail and branch track 542,8 mm (R2)/30°. Suitable action mechanisms: 40296, 40298; 10030.
R5/R6 curved turnout left. Radius of main rail and branch track 542,8 mm (R2)/30°. Suitable action mechanisms: 40295, 40297; 10030.
R2/R3 curved turnout right. Radius of main rail and branch track 358 mm (R2)/30°. Suitable action mechanisms: 40296, 40298; 10030.
R2/R3 curved turnout left. Radius of main rail and branch track 358 mm (R2)/30°. Suitable action mechanisms: 40295, 40297; 10030.
Double crossing. Length 230 mm, crossing angle 15°, effective branch radius 1050mm. Owing to the geometrical characteristics of this type of double slipswitch it is necessary to always use it polarized. Suitable action mechanism, 40295 (or
Standard crossing. Length 230 mm, standard design with internal switch rails, without motor; branch radius 531 mm, crossing angle 15°. Suitable action mechanisms, 2 each x 40295/40297 or 10030. For diagonal installation two D4 and one D12 are
Right hand turnout. Length 230 mm, branch radius 873.5 mm, branch angle 15°. An 8-mm spacer element is included for diagonal installation. Suitable action mechanisms ref. 40296, 40298 or 10030.
Left hand turnout. Length 230 mm, branch radius 873.5 mm, branch angle 15°. An 8-mm spacer element is included for diagonal installation. Suitable action mechanisms ref. 40295, 40297 or 10030.
Curved track of 604,4 mm of radius (R6) and 30 degrees.