8 different freight cars of the Deutsche Reichsbahn (DDR), epoch III. All with NEM coupling pocket.
H0e track - straight adjustment section, 47.9 mm.
Set of two DC wheels. Axle length of 23,8 mm. Diameter of 11 mm. Insulated on one side.
Universal lighting set for passenger wagon with a length from 170 up to 316 mm. The 6 LED modules with a warm white LED each can be optionally positioned on the carrier board so that an adaption to the interior is possible. The carrier board can be
Universal coupler for standard pockets 12 pc.
To trigger the 42605 sleeper. Very small construction, therefore can easily be mounted beneath any vehicle. 6 units / pack
3 units of track connections (for AC, 3-line tracks), suitable for turntable ROCO 42615.
Sleeper and piece to match flex track with concrete sleepers (42401)12 units / pack
F4 flex track with concrete sleepers. Flex tracks can be bent to form any curve up to a radius: R2= 358 mm. In view of the fact that the rail profiles shift out of line with each other, it is necessary to cut them to length. For laying the flex
Manual turnout mechanism left for turnouts without roadbed.
Manual turnout mechanism right for turnouts without roadbed.
Double crossing. Length 345 mm Internal switch rails, branch radius 959 mm, frog angle 10°. For installation crossing from left or right two spacers,D2 and D8, have been included. In each case 2 matching mechanismsare required: 40295, 40297 or
Reed switch in wooden sleeper, to be actuated by means of a magnet (recommended ROCO 42256). This potential-free switching contact can be installed at any point of atrack layout. The size and colour of the sleeper goes with the ROCO LINEtrack, thus
Track ballast (300 g). Matches roadbed track in terms of color andgrain. Genuine stone ballast.
Insulated rail connector with tool. 28 units/pack,can also be used forother track systems.
Uncoupler manual track for Geoline track. Length of 100 mm.
Part set window and lens printed, for locomotive series RENFE 333 from ROCO (ref. 62730, 62731, etc).
Curved track of 419,6 mm of radius (R3) and 7,5 degrees.
Curved track of 358 mm of radius (R2) and 7,5 degrees.
Curved track of 1962 mm of radius (R20) and 5 degrees.
DC wheel set with gear. Suitable for locomotive series 319 from ROCO.
Close coupling heads. 2 pieces per package.
Close coupling mechanism retrofi tset for two-axle cars over 140 mm inlength and bogie cars up to 170 mm inlength. Without closecoupling heads.
Retrofit mechanism for hobbyists. Close coupling mechanism retrofit set for two-axle cars to 140 mm in length. The drawbar has a standard coupler pocket (NEM 362). Without close coupling heads.
The cable is a replacement cable for the Lokmaus® 2/R3/multiMAUS (10760/10792/10810), turnout keyboard (10770) or RouteControl (10772). It cannot be used to extend connector cablees for Lokmaus® 1 (Item no. 10750).
Cable plug for connecting three single cables with flat connector system.
Flat ribbon 3-pole cable. Conductor cross section 0.7 mm2, length 10 m.
Double slip turnout, 22.5°. Length 200mm.
Uncoupler electric track for Geoline track. Length of 100 mm.
Sleeper end piece to match flex track with wooden sleepers (42400). 12 units/pack
DG1 diagonal straight element, length 119 mm.
Set of two DC wheels. Axle length of 23,8 mm. Diameter of 11 mm.
R9/R10 curved turnout right. Radius of main rail and branch track 826,4 mm /30°. Suitable action mechanisms: 40296, 40298; 10030.
Set of six roadbed end pieces. The end pieces make it possible to finish of the roadbeds properly in the case of track bumpers,display case track, etc.
G100 adapter track. Between geoLine and ROCOLINE rails. Length 100mm with roadbed.
R3 curve with ballast. Radius 434,5 mm and 7,5º.
R2 curve with ballast. Radius 358 mm and 7,5º.
Connecting cable, no interference suppression.
Straight track elementsG76,5. Length 76.5 mm
AC wheel (x2). Ø 7,5 mm. 2 pc./package
AC wheel (x2). AC, axle length 23.8 mm. Ø 11 mm. 2 pc./package
Three-way turnout. Length 287.5 mm, branch radius 873.5 mm each, branch angle 15° each. Suitable electric mechanisms: 2x 40296 or 2x 10030.
Track bumper kit. Construction kit for 1 unit optionally with wood plank or bumpers.
Steam generator for locomotives. Without wires. Suitable for digital systems.
Close coupling heads. 2 pieces per package.
The new Z21 Digital Unit for smartphones (Iphone o Android) and tablets (Ipad o Android). This unit open a new time in the digital era, providing a quick and intuitive operation, both of the layout and trains. Multi-protocol central module for DCC
Set of 10 traction tires for 17,5 - 20,0 mm wheels. For three-rail (AC) systems.
Set of 10 traction tires for 15,4 - 17,5 mm wheels. For three-rail (AC) systems.