Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Curved turnout left hand BWl2/3 with bedding, manually operated. Radius of main track and branch track 358 mm (R2), arc angle 30°. Suitable electric turnout drive: 42620 or 42624.
R2/R3 curved turnout right. Radius of main rail and branch track 358 mm (R2)/30° with bedding. Suitable action mechanisms: 42620 or 42624.
R2/R3 curved turnout left. Radius of main rail and branch track 358 mm (R2)/30° with bedding. Suitable action mechanisms: 42620 or 42624.
Double slip turnout DKW10 with bedding, manually operated. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts.
Single slip turnout EKW15 with bedding, manually operated. Standard design with internal switch rails.Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm.
Three-way turnout. Length 287.5 mm, branch radius 873.5 mm each, branch angle 15° each. Suitable electric mechanisms: 2x 42620 or 2x 42624.
Turnout right hand Wl15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization.
Curved track of 1962 mm of radius (R20) and 5 degrees with bedding.
Curved track of 888 mm of radius (R10) and 15 degrees with bedding.
Curved track of 826,4 mm of radius (R9) and 30 degrees with bedding.
Curved track of 604,4 mm of radius (R6) with bedding and 30 degrees.
Curved track of 542,8 mm of radius (R5) and 30 degrees.
Curved track of 481,2 mm of radius (R4) with bedding and 30 degrees.
Curved track of 419,6 mm of radius (R3) with bedding and 30 degrees.
Curved track of 358 mm of radius (R2) with bedding and 30 degrees.
Feeder track with bedding and EMC interference suppressor. 115 mm. Not suitable for digital operation.
50 delayed-short coupling heads for NEM pockets.
Electric uncoupler track with bedding. 115 mm.
Straight track element with bedding, length: 57,5 mm (quarter standard length).
Straight track element with bedding, length: 115 mm (half standard length).
DG1 diagonal straight element with bedding, length 119 mm.
Straight track element with bedding, length: 230 mm (standard length)
Curved track R2¼ with bedding 358 mm, 7,5 Deg.
Curved track R2¼ with bedding 358 mm, 7,5 Deg.
Axle with gear and withour rubber tyres for RENFE locomotive series 319.
Turnout left hand Wl15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization.
Z21 booster, with 3A (track output). Adjustable track voltage via Z21® (12–24 V) RailCom® global detector (allows POM reading in the booster section) Configurable terminal loop feature with short-circuit detector Brake generator feature, configurable ■ Connections via CAN bus, B bus, CDE bus Configuration and update simply via app, PC with Z21® Please...
Suitable for all ROCO LINE bedding switches. The digital switch drive is simply plugged into the recess on the underside of the switches. The electrical connection is made with two cables directly to the rail profiles. The digital switch drive already includes a DCC-Decoder (this new version is RailCom® compatible) and can be programmed after installation.
Cardan bearing for RENFE Ferrobus from ROCO.
Universal bedding switch drive. Low switching current consumption, limit switch.
Left hand turnout with ballast. Length 345 mm, branch radius 1946 mm, branch angle, 8.1°.
Right hand turnout with ballast. Length 345 mm, branch radius 1946 mm, branch angle, 8.1°.
Accessories bag. Suitable for locomotives series RENFE 333.
Ladder set (4 units), for locomotive series RENFE 333 from ROCO.
Steam locomotive S160 of the United States Army Transportation Corps "US ZONE AUSTRIA", Epoch III.
Two-unit tipping truck set. Narrow gauge (H0e)
3 piece set: Heavy duty flat wagons, DB.
Track set C1 contains: Contents: 6x straight tracks G200, 3x straight tracks G185, 2x curved tracks R3, 1x manual curved turnout, left, 1x manual curved turnout, right. Space required: approx. 230 x 100 cm
Track set B1 contains: 2x straight tracks G200, 4x straight tracks G185, 2x curved tracks GB2, 1x manual turnout, left, 1x manual turnout, right. Space required: approx. 250 x 90 cm
Track set A1 contains: 4x straight tracks G200, 1x manual turnout, left, 1x buffer stop kit, 1 pack roadbed end pieces. Space required: approx. 210 x 90 cm
Part set roof for RENFE 333 series. Green livery.
Set of two speakers with sound chambers. 8 Ohm and 1 W each.
Digital coupler mechanism. It is the replace part of the item ROCO 40411, also suitable for conexion to a digital decoder for an automatic function. Length of wire 60 mm
Gondola type Eaos of the Swiss Federal Railways (SBB). Epoch V.
Control unit with many operation functions. Several Z21 WiFi-MULTIMAUS® can be simultaneously operated – possible with all Z21 systems (z21start combined with WLAN Package).
Stop blocks / brake shoes, yellow. For clipping onto the rail. 12 units / pack
Flat ribbon 5-pole cable. Conductor cross section 0.7 mm2, length 10 m.
Cardan bearing for locomotive series RENFE 340 from ROCO.