Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More informationH0e track - Right turnout 15°, metal cross frog matching electric mechanism.
H0e track - Left turnout 15°, metal cross frog matching electric mechanism.
H0e track - standard radius, 261.8 mm, 30°.
H0e track - straight adjustment section, 47.9 mm.
To trigger the 42605 sleeper. Very small construction, therefore can easily be mounted beneath any vehicle. 6 units / pack
3 units of track connections (for AC, 3-line tracks), suitable for turntable ROCO 42615.
Sleeper and piece to match flex track with concrete sleepers (42401)12 units / pack
F4 flex track with concrete sleepers. Flex tracks can be bent to form any curve up to a radius: R2= 358 mm. In view of the fact that the rail profiles shift out of line with each other, it is necessary to cut them to length. For laying the flex
Manual turnout mechanism left for turnouts without roadbed.
Manual turnout mechanism right for turnouts without roadbed.
Double crossing. Length 345 mm Internal switch rails, branch radius 959 mm, frog angle 10°. For installation crossing from left or right two spacers,D2 and D8, have been included. In each case 2 matching mechanismsare required: 40295, 40297 or
Reed switch in wooden sleeper, to be actuated by means of a magnet (recommended ROCO 42256). This potential-free switching contact can be installed at any point of atrack layout. The size and colour of the sleeper goes with the ROCO LINEtrack, thus
Insulated rail connector with tool. 28 units/pack,can also be used forother track systems.
Uncoupler manual track for Geoline track. Length of 100 mm.
Curved track of 419,6 mm of radius (R3) and 7,5 degrees.
Curved track of 358 mm of radius (R2) and 7,5 degrees.
Curved track of 1962 mm of radius (R20) and 5 degrees.
Uncoupler electric track for Geoline track. Length of 100 mm.
Sleeper end piece to match flex track with wooden sleepers (42400). 12 units/pack
R9/R10 curved turnout left. Radius of main rail and branch track 826,4 mm /30°. Suitable action mechanisms: 40296, 40298; 10030.
R9/R10 curved turnout right. Radius of main rail and branch track 826,4 mm /30°. Suitable action mechanisms: 40296, 40298; 10030.
Set of six roadbed end pieces. The end pieces make it possible to finish of the roadbeds properly in the case of track bumpers,display case track, etc.
G100 adapter track. Between geoLine and ROCOLINE rails. Length 100mm with roadbed.
R3 curve with ballast. Radius 434,5 mm and 7,5º.
Straight track elementsG76,5. Length 76.5 mm
G1/2 feeder track. With EMC intereference suppression unit for analog operation.
Three-way turnout. Length 287.5 mm, branch radius 873.5 mm each, branch angle 15° each. Suitable electric mechanisms: 2x 40296 or 2x 10030.