Curved track of 358 mm of radius (R2) with bedding and 30 degrees.
Feeder track with bedding and EMC interference suppressor. 115 mm. Not suitable for digital operation.
Straight track element with bedding, length: 57,5 mm (quarter standard length).
Straight track element with bedding, length: 115 mm (half standard length).
DG1 diagonal straight element with bedding, length 119 mm.
Straight track element with bedding, length: 230 mm (standard length)
Turnout left hand Wl15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization.
Suitable for all ROCO LINE bedding switches. The digital switch drive is simply plugged into the recess on the underside of the switches. The electrical connection is made with two cables directly to the rail profiles. The digital switch drive already includes a DCC-Decoder (this new version is RailCom® compatible) and can be programmed after installation.
Universal bedding switch drive. Low switching current consumption, limit switch.
Left hand turnout with ballast. Length 345 mm, branch radius 1946 mm, branch angle, 8.1°.
Right hand turnout with ballast. Length 345 mm, branch radius 1946 mm, branch angle, 8.1°.
Track set C1 contains: Contents: 6x straight tracks G200, 3x straight tracks G185, 2x curved tracks R3, 1x manual curved turnout, left, 1x manual curved turnout, right. Space required: approx. 230 x 100 cm
Track set B1 contains: 2x straight tracks G200, 4x straight tracks G185, 2x curved tracks GB2, 1x manual turnout, left, 1x manual turnout, right. Space required: approx. 250 x 90 cm
Track set A1 contains: 4x straight tracks G200, 1x manual turnout, left, 1x buffer stop kit, 1 pack roadbed end pieces. Space required: approx. 210 x 90 cm
Uncoupling decoder for geoLine. For the retrofitting of the uncoupling tracks 61118 for digital operation. Protected housing inside the bedding body. Switch addresses can be assigned from 1 to 1024. With short circuit protection.
Extension track set for Digital Starter Set, Set 1 to build a parallel circle. Contents: 12 curved tracks R4, 4 straight tracks G200, 8 straight tracks G185, 2 turnouts left and right each equipped with electric motors and turnout decoders, 1 turnout
H0e isolating rail joiner (fishplate). 24 units.
H0e track - adjustment curve, 13.1°, radius 493 mm.
Light railway turnout, left, with electric motor. Branch angle 24° Length of the straight track 104.2 mm. Radius of the branch track 194.6 mm.
Light railway turnout, right, with electric motor. Branch angle 24° Length of the straight track 104.2 mm. Radius of the branch track 194.6 mm.
Used to equalise differences in length of the flex track 61106. Content: 6 end pieces, 12 rail joiners, 1 universal tool. For Geoline track.
Rail damping element (56 units). For Geoline track.
H0e metal rail joiner (fishplate). 50 units.
H0e track - Flexible light straight track, 730 mm.
H0e track - Flexible straight track, 730 mm.