others

digital-decoders

railway-modelling

home

root

€126.90 In Stock
Z21 Detector X16. ROCO 10819
Track occupancy sensor for 16 track sections.

€126.90 IVA INCL
Buy
€199.00 In Stock
ECoSDetector feedback module. ESU 50094
ECoSDetector feedback module. The ECoSDetector is able to monitor up to 16 track sections and reports the presence of a loco (track occupancy). Each of the 16 inputs has a maximum current capability of 3A. Four of the inputs are RailCom.Opto-couplers are used to provide a reliable detection. Two or three rail operation is easily selected through jumpers....

€199.00 IVA INCL
Buy
€50.95 In Stock
Brake module BM3. LENZ 22620
Brake module BM3.

€50.95 IVA INCL
Buy
€54.95 In Stock
Brake module BM2. LENZ 22610
Brake module BM2.

€54.95 IVA INCL
Buy
€11.95 In Stock
Brake module BM1. LENZ 22600
Brake module BM1.

€11.95 IVA INCL
Buy
€27.95 In Stock
Dual occupancy detector LB101. LENZ 11210
Dual occupancy detector LB101. The LB101 contains two independent occupancy detectors, each of which can be used to detect that a train or piece of rolling stock occupies a section of track. It operates on the “current sensing principle”. The LB100 only detect occupancy when there is a "current consumer" within the monitored track section (detection...

€27.95 IVA INCL
Buy
€22.95 In Stock
DigiNetHub: 5x Loconet and 5x X-BUS hub. DIGIKEIJS DR5099
The DR5099 DigiNetHub is a double repeater where you can connect either four additional LocoNet devices and 4 X-Bus devices to your existing LocoNet and X-Bus devices. The 5 LocoNet and X-Bus connectors are completely separated from each other.

€22.95 IVA INCL
Buy
€59.95 Out of stock
Energy storage system for locomotives. DOEHLER HAAS SP05A-3
Energy storage system for locomotives. Suitable for all Doehler Hass decoders with SUSI interfaz.

€59.95 IVA INCL
Let me know when it's available
€20.90 In Stock
Highly flexible 6-pole spiral cable. ROCO 10754
Highly flexible 6-pole spiral cable.

€20.90 IVA INCL
Buy
€9.50 In Stock
Cable STP, 5 meters. DIGIKEIJS DR60884
STP cable, suitable for DR4088 feedback modules of type S88-N. 5 meters length.

€9.50 IVA INCL
Buy
€9.95 In Stock
Connecor set for ECos. ESU 50200.SP.10005
Connecor set for ECos (also used in other ESU devices). Includes 1 x 7-pin and 2 x 2-pin.

€9.95 IVA INCL
Buy
€19.95 Out of stock
Manual: Digital for beginners, Part 1. FLEISCHMANN 81391
Manual: Digital for beginners, Part 1. This manual, edited by experts, answers the most important questions to the topic “How to digitize your own model railway layout“. Layout construction, programming and other functions are shown and explained here step by step. More to come soon!

€19.95 IVA INCL
Let me know when it's available
€242.90 In Stock
Z21 booster, 3A. ROCO 10806
Z21 booster, with 3A (track output). Adjustable track voltage via Z21® (12–24 V) RailCom® global detector (allows POM reading in the booster section) Configurable terminal loop feature with short-circuit detector Brake generator feature, configurable ■ Connections via CAN bus, B bus, CDE bus Configuration and update simply via app, PC with Z21® Please...

€242.90 IVA INCL
Buy
€5.50 In Stock
Cable STP, 2 meters. DIGIKEIJS DR60882
STP cable, suitable for DR4088 feedback modules of type S88-N. 2 meters length.

€5.50 IVA INCL
Buy
€72.90 Out of stock
Programming adapter. DOEHLER HAAS ADAPTER
The programming-adapter is the perfect complement to the D&H Programmer. It is directly connected to the Programmer and allows the update and sound uploading (for sound decoders) of any kind of D&H decoders.

€72.90 IVA INCL
Let me know when it's available
€168.90 In Stock
Decoder programmer. DOEHLER HAAS PROGRAMMER
Decoder programmer system for all D&H decoders. With this device and the corresponding softare (available to download from www.http://doehler-haass.de) it is possible to program decoders, record sounds, update firmware, etc. It requires USB cable

€168.90 IVA INCL
Buy
€29.90 In Stock
DCC Autofrog (x3). GAUGEMASTER DCC80
Set of three autofrog devices. The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog points is recommended on digital layouts to ensure reliability but this can make extra switching more

€29.90 IVA INCL
Buy
€13.90 In Stock
Time control. KROIS Z21
The time control allows the use of our digital couplers with any decoder without time control function. One or two digital couplers can be connected to the time control. The time control can also be used for other products. After about 4 seconds the

€13.90 IVA INCL
Buy
€42.90 Out of stock
PowerPack Mini, energy storage. ESU 54671
The new ESU PowerPack Mini can be wired to all fourth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (1 Farad capacity) the unit supplies power to

€42.90 IVA INCL
Let me know when it's available
€49.90 In Stock
Decoder tester. ESU 53900
This decoder tester has been designed for testing decoders before these are installed into a loco. The Profi-Tester is simply hooked up to your digital central station, or the LokProgrammer. It comes with plug in for NEM652, NEM651, 21MTC, PluX22

€49.90 IVA INCL
Buy
€13.90 Out of stock
4-pin data bus distributor module. ROCO 10758
To connect further input units (for example Lokmaus® 2/R3 / multiMAUS, (10760/10792/10810), turnout keyboard (10770), RouteControl (10772) or Rocomotion (10785). This distributor module can also be used as an extension of existing lines to units

€13.90 IVA INCL
Let me know when it's available
€149.90 In Stock
Lokprogrammer. ESU 53451
The most well-known LokProgrammer unit, including power supply, serial PC cable, manual, software CD, USB adapter.

€149.90 IVA INCL
Buy
€14.90 Out of stock
6-pin data bus replacement cable. ROCO 10756
The cable is a replacement cable for the Lokmaus® 2/R3/multiMAUS (10760/10792/10810), turnout keyboard (10770) or RouteControl (10772). It cannot be used to extend connector cablees for Lokmaus® 1 (Item no. 10750).

€14.90 IVA INCL
Let me know when it's available
€79.95 In Stock
Auto reverse loop module LK200. LENZ 12200
Auto reverse loop module LK200 for DCC systems. With short circuit detection, enables the change of polarity automatically in reverse loops, turntables, etc. Easy-wiring installation, with only 4 wires to connect, and no additional control

€79.95 IVA INCL
Buy