Returns in 30 days
Satisfied or refunded
2 years warranty
|Dimensiones||25,5 x 15,5 x 4,5 mm|
Excelente resultado !
Josep Lluís A.
Tambien esta bien el decoder
Be the first to ask a question about this product!
Matt Black enamel paint. A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. 14 ml can.
LokPilot V4.0 multiprotocol decoder (MM/DCC/SX), with 8-pin plug according to NEM 652. It has 4 function outputs which achieve 250 mA load each.
The SILVER direkt + was designed especially for locomotives equipped with an 8 pin NEM652 interface. The decoder pins are located directly on the circuit board so that the decoder can be simply plugged onto the interface. It doesn’t get any
Multi protocol locomotive decoder suitable for DC, DCC (2 + 4 figures addresses) and Märklin Motorola (old/new) with automatic format recognition. Adjustable minimum and maximum speeds as well as an open programmable drive step table (28 steps),
Decoder, 8-pin plug, 1.5A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 6 output functions (2 x 150 mA for lights; 2 x 300 mA for auxiliary functions 1 and 2; 2 x 1.0A for auxiliary functions 3 and 4).
Decoder, 8-pin plug, 2.0A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 6 output functions (2 x 150 mA for lights; 2 x 300 mA for auxiliary functions 1 and 2; 2 x 1.0A for auxiliary functions 3 and 4).
Consists of 1 multi protocol special decoder for AC and DC operation and 2 couplings. The couplings can be controlled only by this decoder. If decoders of other manufacturers are used, the couplings can be damaged. Suitable for 8-interfaces NEM 652.
LokPilot V4.0 DCC decoder, with 8-pin plug according to NEM 652. It has 2 function outputs which achieve 150 mA load each.