Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information
Loading...
Track set C1 contains: Contents: 6x straight tracks G200, 3x straight tracks G185, 2x curved tracks R3, 1x manual curved turnout, left, 1x manual curved turnout, right. Space required: approx. 230 x 100 cm
Track set B1 contains: 2x straight tracks G200, 4x straight tracks G185, 2x curved tracks GB2, 1x manual turnout, left, 1x manual turnout, right. Space required: approx. 250 x 90 cm
Track set A1 contains: 4x straight tracks G200, 1x manual turnout, left, 1x buffer stop kit, 1 pack roadbed end pieces. Space required: approx. 210 x 90 cm
Uncoupling decoder for geoLine. For the retrofitting of the uncoupling tracks 61118 for digital operation. Protected housing inside the bedding body. Switch addresses can be assigned from 1 to 1024. With short circuit protection.
Extension track set for Digital Starter Set, Set 1 to build a parallel circle. Contents: 12 curved tracks R4, 4 straight tracks G200, 8 straight tracks G185, 2 turnouts left and right each equipped with electric motors and turnout decoders, 1 turnout
Used to equalise differences in length of the flex track 61106. Content: 6 end pieces, 12 rail joiners, 1 universal tool. For Geoline track.
Rail damping element (56 units). For Geoline track.
Insulated rail connector with tool. 28 units/pack,can also be used forother track systems.
Uncoupler manual track for Geoline track. Length of 100 mm.
Uncoupler electric track for Geoline track. Length of 100 mm.
Set of six roadbed end pieces. The end pieces make it possible to finish of the roadbeds properly in the case of track bumpers,display case track, etc.
G100 adapter track. Between geoLine and ROCOLINE rails. Length 100mm with roadbed.
R3 curve with ballast. Radius 434,5 mm and 7,5º.
Straight track elementsG76,5. Length 76.5 mm
Straight track G100. Length 100 mm (half standard straight element).
Straight track G200. Length 200 mm (standard length).
Turnout decoder geoLine. In connection with the 61195 turnout mechanism, all turnouts, double slip switches or three-way turnouts can be switched by the central unit. The decoder is placed, well-protected inside the bed next to the turnout mechanism
Feed-in element for analog systems. It can be connected to any straight or curvedelement at a point defined in the factory. Only suitable for analog power, because the feed-in element is supplied with an interference suppressor.
Feed-in element for digital systems. It can be connected to any straight or curvedelement at a point defined in the factory. The digital is supplied without an interference suppressor.
Adapter curved track for 22,5° turnouts. Radius 502,7 mm.
R3/R4 curved turnout right hand. Radius of the main track and the branch line 434.5 mm/30°.
R3/R4 curved turnout left hand. Radius of the main track and the branch line 434.5 mm/30°.
Right hand turnout with ballast. Length 200 mm, branch radius 502.7 mm, branch angle, 22.5°.
Left hand turnout with ballast. Length 200 mm, branch radius 502.7 mm, branch angle, 22.5°.
Track set E contains: 1 uncoupler track (61119), 1 straight tracks G200 (61110), 2 straight track G100 (61113), 2 turnout left hand (61140), 2 turnout right hand (61141), 2 buffer (42608) and 2 roadbed end piece (61180). Space required
Track set D contains: 3 straight tracks G200 (61110), 6 straight tracks G185 (61111), 1 straight track G100 (61113), 1 R3 curved track (61123), 10 R4 curved tracks (61124), 2 turnout left hand (61140), 1 curved turnout left hand (61154), 1
Track set C contains: 1 complementary curve (61128), 2 R3 curves (61123), 2 straight tracks G185 (61111), 1 uncoupler track (61119),1 curved turnout right hand (61155) and 1 turnout right hand (61141). Space required approx. 230 x 100 cm.
Track set B contains: 13 straight tracks G200 (61110), 1 turnout left hand (61140), 1 buffer (42608) and 1 roadbed end piece (61180). Space required approx. 250 x 90 cm.