Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More informationLoksound Fx decoder 21-pin, version 5. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project. Note: This is a function decoder, without motor output.
Loksound Fx decoder 8-pin, version 5. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project. Note: This is a function decoder, without motor output.
Interior lighting set with decoder, 255 mm, 11 LEDs, "warm-white“. For gauge N, TT, H0.
SwitchPilot 3 Plus, 8x accessory decoder.
21 pins decoder especially configured for the RENFE 443 from ELECTROTREN.
Automatic electromagnetic coupler (2 units). The electromagnetic digital coupling, which has been known from the ESU Engineering Edition locomotives since the end of 2021 and has been optimized many times, is now also available separately for retrofitting vehicles with an NEM shaft.
21 pins decoder especially configured for the RENFE 251 from ELECTROTREN.
Loudspeaker 22 x 42 mm, square, 4 Ohms, with sound chamber. Specially designed for ESU Loksound 5.0 decoders.
ECoSDetector feedback module. The ECoSDetector is able to monitor up to 16 track sections and reports the presence of a loco (track occupancy). Each of the 16 inputs has a maximum current capability of 3A. Four of the inputs are RailCom.Opto-couplers are used to provide a reliable detection. Two or three rail operation is easily selected through jumpers....
21 pins decoder especially configured for the RENFE 1900 locomotive from MABAR.
21 pins decoder especially configured for the RENFE 4000 locomotive from MABAR.
18 pins decoder for RENFE locomotives series 353 and 354 from Arnold.
A 15x11 mm sugar cube speaker with adaptable soundbox. Identical to those used by ESU in their Loksound 5 decoders.
21 pins decoder especially configured for the RENFE 279 from ELECTROTREN (independent lights version)
21 pins decoder especially configured for the RENFE 253 units from MABAR.
21 pins decoder especially configured for the RENFE 596 diesel railcar from ELECTROTREN.
Sound decoder for Stadler Euro Dual from Sudexpress.
Foam train service tray. With magnetic storage recess.
21 pins decoder especially configured for Euro 4000.
21 pins decoder especially configured for the locomotive series 269 RENFE, from ELECTROTREN.
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. The LokPilot 5 Fx DCC is a "pure-bred" DCC decoder. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.
21 pins decoder especially configured for the locomotive series BB9400 SNCF, from LS Models. Note: Suitable for the last models which requires an specific light mapping (such us item 10209)
18 pins decoder especially configured for the 4700 locomotive from MfTrain.
21 pins decoder especially configured for EURODUAL.
21 pins decoder especially configured for the RENFE S-114 Avant from ELECTROTREN.
LokPilot 5 Basic, with 21 pins connector. For DCC systems, with Railcom. Up to four amplified outputs and eight logic-level outputs are available.
LokPilot 5 Basic, with 8 pins connector. For DCC systems, with Railcom. Up to four amplified outputs are available.
Function decoder LokPilot Fx micro DCC, NEM652. The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.
Function decoder LokPilot Fx micro DCC, Next18. The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.
LokPilot Fx V5.0. It is a function decoder with no motor output and is perfectly made for control cars or functional models. The LokPilot 5 Fx DCC is a "pure-bred" DCC decoder. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.