LokPilot Micro V5.0 DCC decoder, with 6-pin plug according to NEM 651. Allows DC and DCC operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
The ECoboost is the new ESU booster, capable to provide up to 7 amps of power. It is designed to amplify and deliver data in MM / DCC / SX / M4 protocols. This is the latest generation ESU booster, designed for large models.
21 pins decoder especially configured for the RENFE CIVIA autorails from ELECTROTREN (independent lights version)
21 pins decoder especially configured for the RENFE 278 locomotive from ELECTROTREN (independent lights version)
Decoder LokPilot V5.0 with 21 pins, according to NEM660. MKL version. It allows operation in DC and DCC. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each, as weel as four locigal function outputs. It has short circuits protection.
Decoder LokPilot V5.0 with 21 pins, according to NEM660. It allows operation in DC and DCC. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each, as weel as four locigal function outputs. It has short circuits protection.
Decoder LokPilot V5.0 with 8 pins, according to NEM652. It is a multiprotocol decoder, which allows operation in DC and DCC, as well as Motorola, Selectrix and M4. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each. It has short circuits protection.
21 pins decoder especially configured for the RENFE 353 and 354 locomotive from ELECTROTREN.
21 pins decoder especially configured for the locomotive series 276 RENFE, from ELECTROTREN.
Loksound decoder Plux16, version 5 micro. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
Wire harness, 18 pin Next18 socket to open wires, 88 mm.
21 pins decoder especially configured for the locomotive series 4700 CP, from LS Models.
Loksound decoder Next18, version 5 micro. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
Loksound decoder 6 pins, version 5 micro. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
Loksound decoder 8-pin, version 5 micro. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
Loksound decoder 21-pin, version 5. MKL version. Perfect for recording your own sound project.
21 pins decoder especially configured for the RENFE Mikado locomotive from ELECTROTREN (independent lights version)
Speaker set 8 ohms, Single 11x15mm, Modular Soundbox kit for 20mm, 23mm, 16x25mm
Speaker set 8 ohms for parallel wiring. Modular twin speaker baffle set for Sugar cube speakers.
Loksound decoder 6-pin, version 5. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
Loksound decoder Plux22, version 5. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
Loksound decoder 8-pin, version 5. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
Loksound decoder 21-pin, version 5. Includes loudspeaker (11 x 15 mm) with sound chamber. Perfect for recording your own sound project.
Connecor set for ECos (also used in other ESU devices). Includes 1 x 7-pin and 2 x 2-pin.
ECoS 2.1 digital command station, 7“ TFT colour display, 6A. MM/DCC/SX/M4, set with power supply input 240V EU, output 15V-21V, German & English manual
21 pins decoder especially configured for the RENFE TRD from ELECTROTREN.
21 pins decoder especially configured for the RENFE 352 from ELECTROTREN.
The new ESU PowerPack Mini can be wired to all fourth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (1 Farad capacity) the unit supplies power to
21 pins decoder especially configured for the RENFE TRD from ELECTROTREN.
This decoder tester has been designed for testing decoders before these are installed into a loco. The Profi-Tester is simply hooked up to your digital central station, or the LokProgrammer. It comes with plug in for NEM652, NEM651, 21MTC, PluX22
21 pins decoder especially configured for the RENFE 321 locomotive from ELECTROTREN.
Permanent magnet for Märklin® 3015, ET800, ST800, Gauge 1 motors.