Energy storage system for locomotives. Suitable for all Doehler Hass decoders with SUSI interfaz.
LokPilot Micro V5.0 DCC decoder, with 6-pin direct plug according to NEM 651. Allows DC and DCC operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
D&H 21 pins sound decoder with the iconic sounds of this train. Includes speaker and sound chamber.
Digital decoder with sound for RENFE Mikado steam locomotive (oil version). Made by ESU.
LokPilot Micro V5.0 DCC decoder, with 22-pin plug (PLUX22). Allows DC and DCC operation.
Digital decoder with sound for RENFE 470 units, manufactured by ESU. It is 21-pin decoder with independent speaker.
21 pins decoder especially configured for the RENFE 440 units from ELECTROTREN (ref. 3623 and others).
Sound decoder with wires, 1.5A. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 6 output functions (2 x 150 mA for lights; 2 x 300 mA for auxiliary functions 1 and 2 and 1000mA for 3 and 4). Two logic auxiliary functions for 5 and 6.
Sound decoder without connector, 500 mA. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 4 output functions (2 x 150 mA for lights and 2 x 300 mA for auxiliary functions).
Decoder with sound, 6-pin direct plug (NEM651), 500 mA. Multisystem (SX1, SX2, DCC, MM, DC). With SUSI and Railcom interface. 4 output functions (2 x 150 mA for lights and 2 x 300 mA for auxiliary functions).
Function decoder, 1.0A. Multisystem (SX1, SX2, DCC, DC). No motor output. 8 output functions (4 of each are logic level outputs).
1A decoder, NEM652 connector (8-pins). Characteristics: - Motor output of 1A, although it supports puntual peaks of 2.5A. - Six outputs for functions (plus two logical functions). - For both DCC and Motorola systems - Railcom - Dimensions of 20 x 11 x 3,5 mm.
21 pins decoder especially configured for the locomotive series BB7200 SNCF, from LS Models. Note: Suitable for the last models which requires an specific light mapping (such us item 10209)
Highly flexible 6-pole spiral cable.
Decoder LokPilot V5.0 with 21 pins, according to NEM660. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each, as weel as four locigal function outputs. It has short circuits protection.
Decoder LokPilot V5.0 with 6 pins, according to NEM651. It allows operation in DC and DCC. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each. It has short circuits protection.
Decoder LokPilot V5.0 with 8 pins, according to NEM652. It allows operation in DC and DCC. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each. It has short circuits protection.
LokPilot Micro V5.0 decoder, with 6-pin plug according to NEM 651. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. The LokPilot 5 decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
LokPilot Micro V5.0 decoder, with 6-pin plug according to NEM 651. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. The LokPilot 5 decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
LokPilot Micro V5.0 decoder, with 16-pin plug (Plux16). Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 6 function outputs which achieve 250 mA load each.
LokPilot Micro V5.0 decoder, with 8-pin plug according to NEM 652. Allows DCC, Motorola, Selectrix and M4 operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
LokPilot Micro V5.0 DCC decoder, with 18-pin plug (Next18). Allows DC and DCC operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 6 function outputs which achieve 250 mA load each.
LokPilot Micro V5.0 DCC decoder, with 6-pin plug according to NEM 651. Allows DC and DCC operation. RailCom compatible. The LokPilot 5 DCC decoder delivers up to 0.75A of motor current (enough power for most motors). It has 4 function outputs which achieve 250 mA load each.
The ECoboost is the new ESU booster, capable to provide up to 7 amps of power. It is designed to amplify and deliver data in MM / DCC / SX / M4 protocols. This is the latest generation ESU booster, designed for large models.
21 pins decoder especially configured for the RENFE CIVIA autorails from ELECTROTREN (independent lights version)
21 pins decoder especially configured for the RENFE 278 locomotive from ELECTROTREN (independent lights version)
Decoder LokPilot V5.0 with 21 pins, according to NEM660. MKL version. It allows operation in DC and DCC. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each, as weel as four locigal function outputs. It has short circuits protection.
Decoder LokPilot V5.0 with 21 pins, according to NEM660. It allows operation in DC and DCC. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each, as weel as four locigal function outputs. It has short circuits protection.
Decoder LokPilot V5.0 with 8 pins, according to NEM652. It is a multiprotocol decoder, which allows operation in DC and DCC, as well as Motorola, Selectrix and M4. RailComPlus compatible. It has a motor output of up to 1.5A and ten additional function outputs of up to 250mA each. It has short circuits protection.
21 pins decoder especially configured for the RENFE 353 and 354 locomotive from ELECTROTREN.
Digital decoder with sound for RENFE 354 locomotive. Made by ESU, Loksound 5.0.
STP cable, suitable for DR4088 feedback modules of type S88-N. 5 meters length.